Delete esp32-h2c-camera.yaml
This commit is contained in:
ESPHome Device Builder
@@ -1,275 +0,0 @@
|
|||||||
substitutions:
|
|
||||||
device_name: esp32-h2c-camera
|
|
||||||
friendly_name: "H2C Camera"
|
|
||||||
|
|
||||||
esphome:
|
|
||||||
name: ${device_name}
|
|
||||||
friendly_name: ${friendly_name}
|
|
||||||
|
|
||||||
esp32:
|
|
||||||
board: esp32-s3-devkitc-1
|
|
||||||
framework:
|
|
||||||
type: esp-idf
|
|
||||||
|
|
||||||
# Required for ESP32 camera buffering.
|
|
||||||
psram:
|
|
||||||
mode: octal
|
|
||||||
|
|
||||||
logger:
|
|
||||||
|
|
||||||
api:
|
|
||||||
encryption:
|
|
||||||
key: !secret api_encryption_key
|
|
||||||
|
|
||||||
ota:
|
|
||||||
- platform: esphome
|
|
||||||
password: !secret ota_password
|
|
||||||
|
|
||||||
wifi:
|
|
||||||
ssid: !secret wifi_iot_ssid
|
|
||||||
password: !secret wifi_password
|
|
||||||
manual_ip:
|
|
||||||
static_ip: 192.168.69.90
|
|
||||||
gateway: 192.168.69.1
|
|
||||||
subnet: 255.255.255.0
|
|
||||||
ap:
|
|
||||||
ssid: "${friendly_name} Fallback"
|
|
||||||
password: !secret fallback_password
|
|
||||||
# Prevents aggressive reconnection attempts
|
|
||||||
power_save_mode: none # Use 'light' for battery devices
|
|
||||||
|
|
||||||
# Slower but more reliable connection
|
|
||||||
fast_connect: true
|
|
||||||
|
|
||||||
# Handle connection failures gracefully
|
|
||||||
on_connect:
|
|
||||||
- logger.log: "Wi-Fi connected!"
|
|
||||||
on_disconnect:
|
|
||||||
- logger.log: "Wi-Fi disconnected!"
|
|
||||||
|
|
||||||
# Reduce mDNS traffic
|
|
||||||
mdns:
|
|
||||||
disabled: true # Set to true if you use static IPs and don't need discovery
|
|
||||||
|
|
||||||
# captive_portal:
|
|
||||||
|
|
||||||
web_server:
|
|
||||||
port: 80
|
|
||||||
|
|
||||||
esp32_camera:
|
|
||||||
name: "${friendly_name}"
|
|
||||||
external_clock:
|
|
||||||
pin: GPIO5
|
|
||||||
# 10MHz (half the usual 20MHz) slows the sensor's line rate, so each of the
|
|
||||||
# 1200 exposure lines below collects roughly twice the light. Costs
|
|
||||||
# framerate, which does not matter for chamber monitoring.
|
|
||||||
frequency: 10MHz
|
|
||||||
i2c_pins:
|
|
||||||
sda: GPIO8
|
|
||||||
scl: GPIO9
|
|
||||||
data_pins: [GPIO16, GPIO18, GPIO21, GPIO17, GPIO14, GPIO7, GPIO6, GPIO4]
|
|
||||||
vsync_pin: GPIO1
|
|
||||||
href_pin: GPIO2
|
|
||||||
pixel_clock_pin: GPIO15
|
|
||||||
|
|
||||||
# Resolution & quality (ESP32-S3 with Octal PSRAM handles XGA easily)
|
|
||||||
resolution: 1024X768
|
|
||||||
jpeg_quality: 10
|
|
||||||
max_framerate: 20 fps
|
|
||||||
idle_framerate: 0.2 fps
|
|
||||||
frame_buffer_count: 2
|
|
||||||
|
|
||||||
# Orientation
|
|
||||||
vertical_flip: true
|
|
||||||
horizontal_mirror: false
|
|
||||||
|
|
||||||
# Image tuning for chamber monitoring through tinted door.
|
|
||||||
# Low contrast + high brightness lifts the shadows; the LED strips are
|
|
||||||
# allowed to blow out since the chamber is what matters.
|
|
||||||
brightness: 2
|
|
||||||
contrast: -2
|
|
||||||
saturation: 0
|
|
||||||
|
|
||||||
# Exposure & gain are MANUAL on purpose. The two LED strips in frame kept the
|
|
||||||
# auto-exposure meter satisfied, so AEC never lengthened the exposure and the
|
|
||||||
# tinted-door scene stayed black regardless of gain ceiling or AE level.
|
|
||||||
# Pinning both to max forces a bright chamber; the strips clip out entirely.
|
|
||||||
aec_mode: manual
|
|
||||||
aec_value: 1200 # max integration time (0-1200 lines)
|
|
||||||
aec2: true
|
|
||||||
ae_level: 2 # only consulted if AEC is flipped back to auto
|
|
||||||
agc_mode: manual
|
|
||||||
agc_value: 30 # max sensor gain (0-30)
|
|
||||||
agc_gain_ceiling: 128X # only consulted if AGC is flipped back to auto
|
|
||||||
wb_mode: auto
|
|
||||||
|
|
||||||
# Camera endpoints:
|
|
||||||
# Stream: http://<ip>:8080
|
|
||||||
# Snapshot: http://<ip>:8081
|
|
||||||
esp32_camera_web_server:
|
|
||||||
- port: 8080
|
|
||||||
mode: stream
|
|
||||||
- port: 8081
|
|
||||||
mode: snapshot
|
|
||||||
|
|
||||||
switch:
|
|
||||||
# DFRobot board IR illumination control pin.
|
|
||||||
- platform: gpio
|
|
||||||
name: "${friendly_name} IR LED"
|
|
||||||
pin: GPIO47
|
|
||||||
restore_mode: ALWAYS_OFF
|
|
||||||
|
|
||||||
# Flip exposure/gain back to automatic for A/B comparison without a reflash.
|
|
||||||
# Off (the default) = manual exposure per the esp32_camera block above.
|
|
||||||
- platform: template
|
|
||||||
name: "${friendly_name} Auto Exposure"
|
|
||||||
optimistic: true
|
|
||||||
restore_mode: ALWAYS_OFF
|
|
||||||
turn_on_action:
|
|
||||||
- lambda: |-
|
|
||||||
sensor_t *s = esp_camera_sensor_get();
|
|
||||||
if (!s) return;
|
|
||||||
s->set_exposure_ctrl(s, 1);
|
|
||||||
s->set_gain_ctrl(s, 1);
|
|
||||||
turn_off_action:
|
|
||||||
- lambda: |-
|
|
||||||
sensor_t *s = esp_camera_sensor_get();
|
|
||||||
if (!s) return;
|
|
||||||
s->set_exposure_ctrl(s, 0);
|
|
||||||
s->set_gain_ctrl(s, 0);
|
|
||||||
|
|
||||||
sensor:
|
|
||||||
- platform: wifi_signal
|
|
||||||
name: "${friendly_name} WiFi Signal"
|
|
||||||
update_interval: 60s
|
|
||||||
|
|
||||||
- platform: uptime
|
|
||||||
name: "${friendly_name} Uptime"
|
|
||||||
|
|
||||||
- platform: wifi_signal
|
|
||||||
name: "${device_name} WiFi Signal"
|
|
||||||
update_interval: 60s
|
|
||||||
|
|
||||||
- platform: uptime
|
|
||||||
name: "${device_name} Uptime"
|
|
||||||
update_interval: 60s
|
|
||||||
|
|
||||||
button:
|
|
||||||
- platform: restart
|
|
||||||
name: "${friendly_name} Restart"
|
|
||||||
|
|
||||||
text_sensor:
|
|
||||||
- platform: wifi_info
|
|
||||||
ip_address:
|
|
||||||
name: "${device_name} IP Address"
|
|
||||||
ssid:
|
|
||||||
name: "${device_name} Connected SSID"
|
|
||||||
bssid:
|
|
||||||
name: "${device_name} BSSID"
|
|
||||||
|
|
||||||
# Watchdog to auto-reboot if things go wrong
|
|
||||||
interval:
|
|
||||||
- interval: 5min
|
|
||||||
then:
|
|
||||||
- if:
|
|
||||||
condition:
|
|
||||||
and:
|
|
||||||
- lambda: 'return millis() > 300000;' # >5 min uptime
|
|
||||||
- not:
|
|
||||||
wifi.connected:
|
|
||||||
then:
|
|
||||||
- logger.log: "Wi-Fi not connected for 5 min, rebooting..."
|
|
||||||
- delay: 10s
|
|
||||||
- lambda: 'App.safe_reboot();'
|
|
||||||
|
|
||||||
# Dynamic controls exposed to Home Assistant for real-time camera tuning
|
|
||||||
number:
|
|
||||||
# The two that actually drive image brightness in manual mode.
|
|
||||||
- platform: template
|
|
||||||
name: "${friendly_name} Exposure"
|
|
||||||
min_value: 0
|
|
||||||
max_value: 1200
|
|
||||||
step: 25
|
|
||||||
initial_value: 1200
|
|
||||||
optimistic: true
|
|
||||||
set_action:
|
|
||||||
- lambda: |-
|
|
||||||
sensor_t *s = esp_camera_sensor_get();
|
|
||||||
if (s) s->set_aec_value(s, (int)x);
|
|
||||||
|
|
||||||
- platform: template
|
|
||||||
name: "${friendly_name} Gain"
|
|
||||||
min_value: 0
|
|
||||||
max_value: 30
|
|
||||||
step: 1
|
|
||||||
initial_value: 30
|
|
||||||
optimistic: true
|
|
||||||
set_action:
|
|
||||||
- lambda: |-
|
|
||||||
sensor_t *s = esp_camera_sensor_get();
|
|
||||||
if (s) s->set_agc_gain(s, (int)x);
|
|
||||||
|
|
||||||
- platform: template
|
|
||||||
name: "${friendly_name} Brightness"
|
|
||||||
min_value: -2
|
|
||||||
max_value: 2
|
|
||||||
step: 1
|
|
||||||
initial_value: 2
|
|
||||||
optimistic: true
|
|
||||||
set_action:
|
|
||||||
- lambda: |-
|
|
||||||
sensor_t *s = esp_camera_sensor_get();
|
|
||||||
if (s) s->set_brightness(s, (int)x);
|
|
||||||
|
|
||||||
- platform: template
|
|
||||||
name: "${friendly_name} Contrast"
|
|
||||||
min_value: -2
|
|
||||||
max_value: 2
|
|
||||||
step: 1
|
|
||||||
initial_value: -2
|
|
||||||
optimistic: true
|
|
||||||
set_action:
|
|
||||||
- lambda: |-
|
|
||||||
sensor_t *s = esp_camera_sensor_get();
|
|
||||||
if (s) s->set_contrast(s, (int)x);
|
|
||||||
|
|
||||||
- platform: template
|
|
||||||
name: "${friendly_name} AE Level"
|
|
||||||
min_value: -2
|
|
||||||
max_value: 2
|
|
||||||
step: 1
|
|
||||||
initial_value: 2
|
|
||||||
optimistic: true
|
|
||||||
set_action:
|
|
||||||
- lambda: |-
|
|
||||||
sensor_t *s = esp_camera_sensor_get();
|
|
||||||
if (s) s->set_ae_level(s, (int)x);
|
|
||||||
|
|
||||||
select:
|
|
||||||
# Caps how far AGC may amplify. Higher = brighter but noisier; back this off
|
|
||||||
# if the chamber image gets too grainy at 128X.
|
|
||||||
- platform: template
|
|
||||||
name: "${friendly_name} Gain Ceiling"
|
|
||||||
optimistic: true
|
|
||||||
initial_option: "128X"
|
|
||||||
options:
|
|
||||||
- "2X"
|
|
||||||
- "4X"
|
|
||||||
- "8X"
|
|
||||||
- "16X"
|
|
||||||
- "32X"
|
|
||||||
- "64X"
|
|
||||||
- "128X"
|
|
||||||
set_action:
|
|
||||||
- lambda: |-
|
|
||||||
sensor_t *s = esp_camera_sensor_get();
|
|
||||||
if (!s) return;
|
|
||||||
int idx = 6;
|
|
||||||
if (x == "2X") idx = 0;
|
|
||||||
else if (x == "4X") idx = 1;
|
|
||||||
else if (x == "8X") idx = 2;
|
|
||||||
else if (x == "16X") idx = 3;
|
|
||||||
else if (x == "32X") idx = 4;
|
|
||||||
else if (x == "64X") idx = 5;
|
|
||||||
s->set_gainceiling(s, (gainceiling_t)idx);
|
|
||||||
|
|
||||||
Reference in New Issue
Block a user