diff --git a/esphome/esp32-h2c-camera.yaml b/esphome/esp32-h2c-camera.yaml
deleted file mode 100644
index 03e0e99..0000000
--- a/esphome/esp32-h2c-camera.yaml
+++ /dev/null
@@ -1,275 +0,0 @@
-substitutions:
-  device_name: esp32-h2c-camera
-  friendly_name: "H2C Camera"
-
-esphome:
-  name: ${device_name}
-  friendly_name: ${friendly_name}
-
-esp32:
-  board: esp32-s3-devkitc-1
-  framework:
-    type: esp-idf
-
-# Required for ESP32 camera buffering.
-psram:
-  mode: octal
-
-logger:
-
-api:
-  encryption:
-    key: !secret api_encryption_key
-
-ota:
-  - platform: esphome
-    password: !secret ota_password
-
-wifi:
-  ssid: !secret wifi_iot_ssid
-  password: !secret wifi_password
-  manual_ip:
-    static_ip: 192.168.69.90
-    gateway: 192.168.69.1
-    subnet: 255.255.255.0
-  ap:
-    ssid: "${friendly_name} Fallback"
-    password: !secret fallback_password
-  # Prevents aggressive reconnection attempts
-  power_save_mode: none  # Use 'light' for battery devices
-  
-  # Slower but more reliable connection
-  fast_connect: true
-  
-  # Handle connection failures gracefully
-  on_connect:
-    - logger.log: "Wi-Fi connected!"
-  on_disconnect:
-    - logger.log: "Wi-Fi disconnected!"
-
-# Reduce mDNS traffic
-mdns:
-  disabled: true  # Set to true if you use static IPs and don't need discovery
-
-# captive_portal:
-
-web_server:
-  port: 80
-
-esp32_camera:
-  name: "${friendly_name}"
-  external_clock:
-    pin: GPIO5
-    # 10MHz (half the usual 20MHz) slows the sensor's line rate, so each of the
-    # 1200 exposure lines below collects roughly twice the light. Costs
-    # framerate, which does not matter for chamber monitoring.
-    frequency: 10MHz
-  i2c_pins:
-    sda: GPIO8
-    scl: GPIO9
-  data_pins: [GPIO16, GPIO18, GPIO21, GPIO17, GPIO14, GPIO7, GPIO6, GPIO4]
-  vsync_pin: GPIO1
-  href_pin: GPIO2
-  pixel_clock_pin: GPIO15
-
-  # Resolution & quality (ESP32-S3 with Octal PSRAM handles XGA easily)
-  resolution: 1024X768
-  jpeg_quality: 10
-  max_framerate: 20 fps
-  idle_framerate: 0.2 fps
-  frame_buffer_count: 2
-
-  # Orientation
-  vertical_flip: true
-  horizontal_mirror: false
-
-  # Image tuning for chamber monitoring through tinted door.
-  # Low contrast + high brightness lifts the shadows; the LED strips are
-  # allowed to blow out since the chamber is what matters.
-  brightness: 2
-  contrast: -2
-  saturation: 0
-
-  # Exposure & gain are MANUAL on purpose. The two LED strips in frame kept the
-  # auto-exposure meter satisfied, so AEC never lengthened the exposure and the
-  # tinted-door scene stayed black regardless of gain ceiling or AE level.
-  # Pinning both to max forces a bright chamber; the strips clip out entirely.
-  aec_mode: manual
-  aec_value: 1200        # max integration time (0-1200 lines)
-  aec2: true
-  ae_level: 2            # only consulted if AEC is flipped back to auto
-  agc_mode: manual
-  agc_value: 30          # max sensor gain (0-30)
-  agc_gain_ceiling: 128X # only consulted if AGC is flipped back to auto
-  wb_mode: auto
-
-# Camera endpoints:
-# Stream:   http://<ip>:8080
-# Snapshot: http://<ip>:8081
-esp32_camera_web_server:
-  - port: 8080
-    mode: stream
-  - port: 8081
-    mode: snapshot
-
-switch:
-  # DFRobot board IR illumination control pin.
-  - platform: gpio
-    name: "${friendly_name} IR LED"
-    pin: GPIO47
-    restore_mode: ALWAYS_OFF
-
-  # Flip exposure/gain back to automatic for A/B comparison without a reflash.
-  # Off (the default) = manual exposure per the esp32_camera block above.
-  - platform: template
-    name: "${friendly_name} Auto Exposure"
-    optimistic: true
-    restore_mode: ALWAYS_OFF
-    turn_on_action:
-      - lambda: |-
-          sensor_t *s = esp_camera_sensor_get();
-          if (!s) return;
-          s->set_exposure_ctrl(s, 1);
-          s->set_gain_ctrl(s, 1);
-    turn_off_action:
-      - lambda: |-
-          sensor_t *s = esp_camera_sensor_get();
-          if (!s) return;
-          s->set_exposure_ctrl(s, 0);
-          s->set_gain_ctrl(s, 0);
-
-sensor:
-  - platform: wifi_signal
-    name: "${friendly_name} WiFi Signal"
-    update_interval: 60s
-
-  - platform: uptime
-    name: "${friendly_name} Uptime"
-  
-  - platform: wifi_signal
-    name: "${device_name} WiFi Signal"
-    update_interval: 60s
-    
-  - platform: uptime
-    name: "${device_name} Uptime"
-    update_interval: 60s
-
-button:
-  - platform: restart
-    name: "${friendly_name} Restart"
-
-text_sensor:
-  - platform: wifi_info
-    ip_address:
-      name: "${device_name} IP Address"
-    ssid:
-      name: "${device_name} Connected SSID"
-    bssid:
-      name: "${device_name} BSSID"
-
-# Watchdog to auto-reboot if things go wrong
-interval:
-  - interval: 5min
-    then:
-      - if:
-          condition:
-            and:
-              - lambda: 'return millis() > 300000;'  # >5 min uptime
-              - not:
-                  wifi.connected:
-          then:
-            - logger.log: "Wi-Fi not connected for 5 min, rebooting..."
-            - delay: 10s
-            - lambda: 'App.safe_reboot();'
-
-# Dynamic controls exposed to Home Assistant for real-time camera tuning
-number:
-  # The two that actually drive image brightness in manual mode.
-  - platform: template
-    name: "${friendly_name} Exposure"
-    min_value: 0
-    max_value: 1200
-    step: 25
-    initial_value: 1200
-    optimistic: true
-    set_action:
-      - lambda: |-
-          sensor_t *s = esp_camera_sensor_get();
-          if (s) s->set_aec_value(s, (int)x);
-
-  - platform: template
-    name: "${friendly_name} Gain"
-    min_value: 0
-    max_value: 30
-    step: 1
-    initial_value: 30
-    optimistic: true
-    set_action:
-      - lambda: |-
-          sensor_t *s = esp_camera_sensor_get();
-          if (s) s->set_agc_gain(s, (int)x);
-
-  - platform: template
-    name: "${friendly_name} Brightness"
-    min_value: -2
-    max_value: 2
-    step: 1
-    initial_value: 2
-    optimistic: true
-    set_action:
-      - lambda: |-
-          sensor_t *s = esp_camera_sensor_get();
-          if (s) s->set_brightness(s, (int)x);
-
-  - platform: template
-    name: "${friendly_name} Contrast"
-    min_value: -2
-    max_value: 2
-    step: 1
-    initial_value: -2
-    optimistic: true
-    set_action:
-      - lambda: |-
-          sensor_t *s = esp_camera_sensor_get();
-          if (s) s->set_contrast(s, (int)x);
-
-  - platform: template
-    name: "${friendly_name} AE Level"
-    min_value: -2
-    max_value: 2
-    step: 1
-    initial_value: 2
-    optimistic: true
-    set_action:
-      - lambda: |-
-          sensor_t *s = esp_camera_sensor_get();
-          if (s) s->set_ae_level(s, (int)x);
-
-select:
-  # Caps how far AGC may amplify. Higher = brighter but noisier; back this off
-  # if the chamber image gets too grainy at 128X.
-  - platform: template
-    name: "${friendly_name} Gain Ceiling"
-    optimistic: true
-    initial_option: "128X"
-    options:
-      - "2X"
-      - "4X"
-      - "8X"
-      - "16X"
-      - "32X"
-      - "64X"
-      - "128X"
-    set_action:
-      - lambda: |-
-          sensor_t *s = esp_camera_sensor_get();
-          if (!s) return;
-          int idx = 6;
-          if (x == "2X") idx = 0;
-          else if (x == "4X") idx = 1;
-          else if (x == "8X") idx = 2;
-          else if (x == "16X") idx = 3;
-          else if (x == "32X") idx = 4;
-          else if (x == "64X") idx = 5;
-          s->set_gainceiling(s, (gainceiling_t)idx);
-