128 lines
6.3 KiB
Markdown
128 lines
6.3 KiB
Markdown
|
# Bambu fleet display
|
|||
|
|
|
|||
|
|
ESPHome/LVGL monitor for the **Sunton ESP32-8048S043C**, with an 800×480 landscape RGB
|
|||
|
|
display, GT911 capacitive touch, 16 MB flash and 8 MB octal PSRAM. The hardware pins
|
|||
|
|
and LCD timings follow the [ESPHome device reference](https://devices.esphome.io/devices/sunton-esp32-8048s043c/).
|
|||
|
|
This configuration is for the **C** capacitive-touch version.
|
|||
|
|
|
|||
|
|
Inspired by [BambuHelper](https://github.com/Keralots/BambuHelper), this implementation
|
|||
|
|
subscribes to the existing Home Assistant Bambu Lab entities over a single encrypted
|
|||
|
|
ESPHome API connection. Home Assistant handles the printer connections. No Bambu
|
|||
|
|
access codes, cloud credentials or additional Home Assistant automations are needed.
|
|||
|
|
Home Assistant must be running and its Bambu integration must have current printer data.
|
|||
|
|
|
|||
|
|
## Pages and navigation
|
|||
|
|
|
|||
|
|
|
|||
|
|
|
|||
|
|
The configured swipe order is:
|
|||
|
|
|
|||
|
|
1. PrintsCharming — P1S, Office, both four-slot AMS units.
|
|||
|
|
2. Polly-Pocket — A1 mini, Office, external spool.
|
|||
|
|
3. Ds-Turd-Flinger — A1, Upstairs, four-slot AMS.
|
|||
|
|
4. Jordyns-Layer-Slayer — A1, Upstairs, four-slot AMS.
|
|||
|
|
5. Constipation-Orion — Office, left/right nozzles and four-slot AMS.
|
|||
|
|
|
|||
|
|
Swipe left for the next printer or right for the previous printer. Navigation wraps
|
|||
|
|
from the last page to the first. Previous/Next buttons provide the same navigation.
|
|||
|
|
Swipes propagate through the metric cards and filament slots. A swipe consumes the
|
|||
|
|
rest of that touch so dragging across a navigation button does not also click it.
|
|||
|
|
|
|||
|
|
Each page shows print status, job name, progress, nozzle and bed current/target
|
|||
|
|
temperatures, remaining time, current/total layers, print stage, part fan speed and
|
|||
|
|
filament colors/types. The active filament slot has a green outline. Print errors
|
|||
|
|
and HMS alerts change the status badge to red; paused prints use amber. The display
|
|||
|
|
shows an alert badge rather than the detailed HMS diagnostic text.
|
|||
|
|
|
|||
|
|
When Home Assistant disconnects or a printer is offline, its live metrics are cleared
|
|||
|
|
to `--` rather than continuing to show cached values as live. Unknown individual
|
|||
|
|
values also show `--`. Remaining time respects the HA sensor's `h`, `min` or `s`
|
|||
|
|
unit, and temperature labels use the imported HA temperature unit. Only the visible
|
|||
|
|
page is refreshed each second; every printer's subscriptions remain connected.
|
|||
|
|
|
|||
|
|
This version provides monitoring and local page navigation. Camera feeds, cover
|
|||
|
|
images, printer pause/stop controls, power switching, cloud login and automatic
|
|||
|
|
printer rotation are outside its current scope.
|
|||
|
|
|
|||
|
|
## Install
|
|||
|
|
|
|||
|
|
1. Keep `esphome/bambu-printer-display.yaml` and the entire `bambu-display/` folder
|
|||
|
|
together in the ESPHome configuration directory. The generated package is checked
|
|||
|
|
in, so the ESPHome dashboard can compile it without running the generator first.
|
|||
|
|
2. Supply the existing `api_encryption_key`, `wifi_iot_ssid` and `wifi_password`
|
|||
|
|
entries in that directory's `secrets.yaml`.
|
|||
|
|
3. Use ESPHome **2026.9.0 or newer**. Compile and install
|
|||
|
|
`bambu-printer-display.yaml` over the board's USB-to-UART bridge for the first
|
|||
|
|
flash; subsequent installs can use encrypted OTA.
|
|||
|
|
4. Add **Bambu Printer Display** through Home Assistant's ESPHome integration using
|
|||
|
|
the same API encryption key. The display only subscribes to entities, so it does
|
|||
|
|
not require permission to perform Home Assistant actions.
|
|||
|
|
5. Confirm all pages receive data and verify touch direction and color order on the
|
|||
|
|
physical panel. Entity IDs match the repository's `ha-entities.txt` snapshot;
|
|||
|
|
renamed or disabled entities in live HA must be corrected/enabled there.
|
|||
|
|
|
|||
|
|
The USB D+/D− GPIO19/20 pins are used by the board's touch bus. Logging therefore
|
|||
|
|
uses UART0. ESPHome may still warn about these two pins; they are intentional for
|
|||
|
|
this board. If GT911 is not found at `0x5D`, inspect the I²C scan and use its reported
|
|||
|
|
address (some hardware revisions select `0x14`). Backlight is GPIO2; RGB data pins
|
|||
|
|
and timings are explicit in the main YAML rather than borrowed from a 5″ board.
|
|||
|
|
|
|||
|
|
CLI checks from the repository root:
|
|||
|
|
|
|||
|
|
```sh
|
|||
|
|
esphome config esphome/bambu-printer-display.yaml
|
|||
|
|
esphome compile esphome/bambu-printer-display.yaml
|
|||
|
|
```
|
|||
|
|
|
|||
|
|
## Change or expand the fleet
|
|||
|
|
|
|||
|
|
Edit **`printers.yaml`**, then regenerate and flash the display:
|
|||
|
|
|
|||
|
|
```sh
|
|||
|
|
python esphome/bambu-display/generate.py
|
|||
|
|
python esphome/bambu-display/generate.py --check
|
|||
|
|
```
|
|||
|
|
|
|||
|
|
The generator requires PyYAML (already included in ESPHome's Python environment).
|
|||
|
|
Do not hand-edit `generated.yaml`. There is no two-printer limit in the generator;
|
|||
|
|
adding a printer creates its own subscriptions, widgets and swipe page. The practical
|
|||
|
|
limit depends on the board's available RAM and flash, and adding printers requires
|
|||
|
|
regenerating and installing the firmware. Five printers are configured; generation
|
|||
|
|
is also tested with seven. Each printer's filament strip supports up to eight slots.
|
|||
|
|
|
|||
|
|
```yaml
|
|||
|
|
- id: another_printer
|
|||
|
|
name: Another Printer
|
|||
|
|
subtitle: Workshop
|
|||
|
|
entity_prefix: my_bambu_printer
|
|||
|
|
entities:
|
|||
|
|
progress: sensor.renamed_progress
|
|||
|
|
time_left: sensor.renamed_remaining_time
|
|||
|
|
filament_banks:
|
|||
|
|
- label: A
|
|||
|
|
entity_prefix: my_bambu_printer_ams_1
|
|||
|
|
```
|
|||
|
|
|
|||
|
|
For a dual-nozzle printer add `dual_nozzle: true`. For external filament add
|
|||
|
|
`external_spools: [{label: EXT, entity: sensor.my_external_spool}]`. Per-metric
|
|||
|
|
`entities` overrides use the keys in `NUMERIC`, `DUAL`, `TEXT` and `BINARY` inside
|
|||
|
|
`generate.py`. A remaining-time override also updates its unit subscription.
|
|||
|
|
Filament entries use the Bambu integration's `type`, `color` and `active` attributes.
|
|||
|
|
|
|||
|
|
## Development checks and screenshots
|
|||
|
|
|
|||
|
|
```sh
|
|||
|
|
python -m unittest discover -s esphome/bambu-display -v
|
|||
|
|
clang++ -std=c++17 -Wall -Wextra -Werror esphome/bambu-display/test_dashboard.cpp -o /tmp/bambu-dashboard-test
|
|||
|
|
/tmp/bambu-dashboard-test
|
|||
|
|
python esphome/bambu-display/preview.py
|
|||
|
|
```
|
|||
|
|
|
|||
|
|
`preview.py` compiles the same generated LVGL widgets for ESPHome's SDL host with
|
|||
|
|
clearly synthetic telemetry, then captures all five pages into `previews/`. It needs
|
|||
|
|
ESPHome, Pillow, a C++ compiler and SDL2 (`sdl2-config` on PATH). It runs headlessly,
|
|||
|
|
without connecting to Home Assistant or any printer. It also injects LVGL pointer
|
|||
|
|
samples to check left/right swipes, page wraparound and consumption of a swipe that
|
|||
|
|
starts on a navigation button. These are software layout
|
|||
|
|
previews; physical panel timings, touch and Wi-Fi still need a hardware check.
|