Assert the panel motion contract and hard rules, not just build them

The confirm dialog (fade + scale .96->1 over --nq-dur-modal/--nq-ease-out),
the seal (fade + scale 1.15->1 over --nq-dur-base), the quest-complete
12 s countdown return and the 40 s idle return already matched
PANEL-SPEC, but nothing pinned them: a token or keyframe edit could
silently drift the panel off the approved mockup timing.

tests/test_panel_cards.py now asserts the entrance timing and easing,
the byte-identical served token copy, and the section 1/6 hard rules
(22px body floor, token-only inks, no hover states, no animation loops,
inert dock strip, whole-plate tap target, control-free away plate), and
the quest-log harness drives the 1c countdown return end-to-end against
the bundle HACS ships.

README.md

@@ -159,50 +159,9 @@ Sensors the automations read: `sensor.nestquest_<child>_quests_due_today`
 
 Run these steps in order to display the NestQuest panel on a TouchHub
 wall device. The panel is an HA Lovelace dashboard, so the kiosk browser
-is simply a Home Assistant client. The path below is zero-config: the
-integration registers its panel dashboard itself on setup, so no YAML
-and no hand-built views are involved.
+is simply a Home Assistant client.
 
-1. **Install the integration and add the config entry.** Install
-   NestQuest via HACS or manually (see Installation above) and restart
-   Home Assistant. Then, in *Settings → Devices & Services*, click
-   **Add Integration**, search for **NestQuest**, and submit the flow —
-   it has no fields; it just creates the single config entry. Then open
-   the entry, click **Configure**, and fill the panel-plane API
-   connection in the options flow:
-
-   - **NestQuest API base URL** — the full `http://host:port` URL of
-     your NestQuest API service (default `http://127.0.0.1:8000`).
-   - **Panel service token** — the token the panel presents to the API
-     service as its Bearer credential. It may stay empty until you have
-     one; a pasted token must be unpadded.
-
-   The form's remaining fields (panel idle timeout, coordinator update
-   interval, last-good snapshot staleness) have defaults that serve the
-   panel and need no change here.
-
-2. **The panel dashboard appears automatically.** On setup the
-   integration registers one storage-mode Lovelace dashboard: a sidebar
-   entry titled **NestQuest** at the URL path `/nestquest`, whose stored
-   config is nothing but the **`custom:nestquest-party` strategy**
-   (`strategy: { type: custom:nestquest-party }`). The strategy
-   generates the views at render time from the household roster:
-
-   - **The Party** — the party-board view at `/nestquest/party`; the
-     dashboard root `/nestquest` shows it as the first view.
-   - one quest-log view per child at `/nestquest/<child-slug>`
-     ("Ada's Quest Log", …), in roster order.
-
-   Nothing is hand-configured: no YAML, no manual views, no
-   `child_order`, no `quest_log_path`/`board_path` — the board and the
-   quest logs compute their navigation paths from the dashboard's own
-   URL — and every generated view is already in **Panel** layout (see
-   the two constraints below). If the Lovelace surfaces are unavailable
-   (for example when Lovelace runs in YAML mode), setup logs a warning
-   and skips the registration; create the dashboard manually with the
-   same strategy as described in the manual alternative below.
-
-3. **Create a dedicated kiosk user.** In *Settings → People → Users*, add
+1. **Create a dedicated kiosk user.** In *Settings → People → Users*, add
    a new user for the wall device. Make it **non-admin**, and ensure it is
    not in the NestQuest admin allowlist. The allowlist blocks the NestQuest
    **admin** operations — `uncomplete_quest`, `create_quest_definition`,
@@ -215,101 +174,81 @@ and no hand-built views are involved.
    Assistant user it may also reach other permitted Home Assistant entities
    and services.
 
-4. **Open the dashboard and point TouchHub at it.** Open
-   `http://<home-assistant>/nestquest` in a browser first and check the
-   party board renders with your children's crests. Then, in the
-   TouchHub launcher, add the **Home Assistant Lovelace** app to the
-   dock and paste the dashboard URL from step 2 — the dashboard root,
-   `/nestquest` (TouchHub loads that URL directly as the kiosk landing
-   page). Set TouchHub **Auto-Return** to a value GREATER than the
-   quest log's `idle_return_seconds` (default 40s) — recommend **60s or
-   higher**. If Auto-Return is at or below 40s, TouchHub returns to its
-   launcher before the quest log's idle return can navigate back to the
-   party board.
+2. **Build a dashboard with only the NestQuest panel cards.** The
+   recommended path is the **zero-config dashboard strategy**: create a
+   Lovelace dashboard whose URL slug is `nestquest` with
 
-5. **Log the kiosk session in.** Sign in on the device as the dedicated
-   kiosk user from step 3, and leave that session logged in.
+   ```yaml
+   strategy:
+     type: custom:nestquest-party
+   ```
+
+   and no views of your own — the strategy generates the party-board and
+   quest-log views (each already in Panel layout) from the household
+   roster at render time. Optional `url_path` and `weather_entity` keys
+   may sit beside `strategy:`. The manual instructions below describe
+   building the two views by hand if you prefer not to use the strategy.
+
+   **Manual alternative:** create a Lovelace dashboard whose **URL slug
+   is `nestquest`** (Settings →
+   Dashboards → Edit → URL slug). A functional panel needs **two** views
+   in that dashboard, each with its own card config from
+   `design/ENTITIES-AND-SERVICES.md` §4. Give the views these exact URL
+   paths (the path segment after the dashboard slug):
+
+   - **View 1 path `board`** (URL `/nestquest/board`) — party board
+     (`type: custom:nestquest-party-board-card`): the household quest
+     board. Set `weather_entity` (optional; the dock falls back to
+     date/time), `quest_log_path: /nestquest/log` (the view the crest tap
+     navigates to), and `child_order: [slug1, slug2, slug3]` listing each
+     child's slug in display order.
+
+   - **View 2 path `log`** (URL `/nestquest/log`) — quest log
+     (`type: custom:nestquest-quest-log-card`): the per-child quest screen
+     the party board hops to. Set `board_path: /nestquest/board` (the
+     party-board view to return to), `weather_entity`,
+     `idle_return_seconds` (must be shorter than TouchHub Auto-Return),
+     `confirm_timeout_seconds`, and `complete_screen_seconds`. The quest
+     log reads the selected child's slug from the view's URL path, so the
+     board → log hop is a plain Lovelace navigation.
+
+    Each view's layout MUST be set to **Panel** (Edit Dashboard → pencil on the
+    view → View type: Panel). Home Assistant's default Masonry layout constrains
+    the 1080px-tall NestQuest card to a narrow column; Panel (single-card)
+    layout is what renders the card full-screen at 1920×1080.
+
+    The dashboard contains only the NestQuest panel card for each view —
+    no other cards, no admin controls.
+
+   The `quest_log_path` and `board_path` values must match the dashboard
+   slug and view paths above: `/<slug>/<view>`. If you chose `nestquest`
+   as the dashboard slug with view paths `board` and `log`, the card
+   configs are already correct. If you pick different names, substitute
+   your actual paths in **both** card configs — e.g. a dashboard slug
+   `chores` with view paths `main` and `history` needs
+   `quest_log_path: /chores/history` and `board_path: /chores/main`.
+   Navigation between the two views fails (the crest tap or back button
+   lands on a 404) if the card config paths do not match the dashboard
+   slug and view paths exactly.
+
+   See `design/ENTITIES-AND-SERVICES.md` §4 for the full card YAML.
+
+3. **Point TouchHub at it.** In the TouchHub launcher, add the **Home
+   Assistant Lovelace** app to the dock and paste the dashboard URL from
+   step 2 — the party-board view URL, e.g. `/nestquest/board` (TouchHub
+   loads that URL directly as the kiosk landing page). Set TouchHub
+   **Auto-Return** to a value GREATER than the quest log's
+   `idle_return_seconds` (default 40s) — recommend **60s or higher**. If
+   Auto-Return is at or below 40s, TouchHub returns to its launcher before
+   the quest log's idle return can navigate back to the party board.
+
+4. **Log the kiosk session in.** Sign in on the device as the dedicated
+   kiosk user from step 1, and leave that session logged in.
 
 TouchHub loads the dashboard URL directly. The NestQuest cards are normal
 Lovelace cards, not an iframe, so no Home Assistant framing setting is
 needed.
 
-### The two constraints
-
-- **Panel layout.** Every view must be in **Panel** (single-card)
-  layout: Home Assistant's default Masonry layout constrains the
-  1080px-tall NestQuest card to a narrow column, while Panel renders the
-  card full-screen at 1920×1080. The zero-config path already satisfies
-  the requirement — the strategy generates every view as
-  `type: panel` — while the manual alternative below requires setting
-  the layout by hand on each view (Edit Dashboard → pencil on the view
-  → View type: Panel).
-
-- **TouchHub Auto-Return.** TouchHub's **Auto-Return** must be greater
-  than the quest log's `idle_return_seconds` (default 40s) — recommend
-  **60s or higher** — so the launcher does not reclaim the wall device
-  before the quest log's own idle return navigates back to the party
-  board.
-
-### Manual alternative: build the dashboard by hand
-
-If you prefer not to use the zero-config dashboard above — or its
-registration was skipped — configure a Lovelace dashboard whose **URL
-slug is `nestquest`** (Settings → Dashboards → Edit → URL slug)
-yourself. Two options, in decreasing order of convenience:
-
-- **Use the strategy.** Give the dashboard
-
-  ```yaml
-  strategy:
-    type: custom:nestquest-party
-  ```
-
-  and no views of your own — the strategy generates the party-board and
-  quest-log views (each already in Panel layout) from the household
-  roster at render time. Optional `url_path` and `weather_entity` keys
-  may sit beside `strategy:`.
-
-- **Build the two views by hand.** A functional panel needs **two**
-  views in that dashboard, each with its own card config from
-  `design/ENTITIES-AND-SERVICES.md` §4. Give the views these exact URL
-  paths (the path segment after the dashboard slug):
-
-  - **View 1 path `board`** (URL `/nestquest/board`) — party board
-    (`type: custom:nestquest-party-board-card`): the household quest
-    board. Set `weather_entity` (optional; the dock falls back to
-    date/time), `quest_log_path: /nestquest/log` (the view the crest tap
-    navigates to), and `child_order: [slug1, slug2, slug3]` listing each
-    child's slug in display order.
-
-  - **View 2 path `log`** (URL `/nestquest/log`) — quest log
-    (`type: custom:nestquest-quest-log-card`): the per-child quest screen
-    the party board hops to. Set `board_path: /nestquest/board` (the
-    party-board view to return to), `weather_entity`,
-    `idle_return_seconds` (must be shorter than TouchHub Auto-Return —
-    see the two constraints above), `confirm_timeout_seconds`, and
-    `complete_screen_seconds`. The quest log reads the selected child's
-    slug from the view's URL path, so the board → log hop is a plain
-    Lovelace navigation.
-
-  The dashboard contains only the NestQuest panel card for each view —
-  no other cards, no admin controls. Each view's layout MUST be set to
-  **Panel** — see the two constraints above for why; the strategy
-  generates it for you, hand-built views do not get it for free.
-
-  The `quest_log_path` and `board_path` values must match the dashboard
-  slug and view paths above: `/<slug>/<view>`. If you chose `nestquest`
-  as the dashboard slug with view paths `board` and `log`, the card
-  configs are already correct. If you pick different names, substitute
-  your actual paths in **both** card configs — e.g. a dashboard slug
-  `chores` with view paths `main` and `history` needs
-  `quest_log_path: /chores/history` and `board_path: /chores/main`.
-  Navigation between the two views fails (the crest tap or back button
-  lands on a 404) if the card config paths do not match the dashboard
-  slug and view paths exactly.
-
-  See `design/ENTITIES-AND-SERVICES.md` §4 for the full card YAML.
-
 ## Developer Setup and Testing
 
 This project uses [`uv`](https://github.com/astral-sh/uv) for fast Python package and dependency management.

custom_components/nestquest/sensor.py

@@ -21,6 +21,8 @@ missed instances, and ``admin_instances`` includes them (D-009).
 """
 from __future__ import annotations
 
+import re
+import unicodedata
 from collections.abc import Callable, Iterable
 from typing import Any
 
@@ -32,7 +34,6 @@ from homeassistant.config_entries import ConfigEntry
 from homeassistant.core import HomeAssistant
 from homeassistant.helpers.entity import DeviceInfo
 from homeassistant.helpers.update_coordinator import CoordinatorEntity
-from homeassistant.util import slugify
 
 from .const import DOMAIN
 from .coordinator import (
@@ -49,12 +50,9 @@ from .core.snapshot import instance_payload
 #: sensors reuse the same helper.
 MAX_STATE_LENGTH = 255
 
-#: Entity-id length cap the roster applies to HA's slugify: HA's
-#: slugifier itself does NOT truncate, but the entity registry derives
-#: entity ids as ``<domain>.<slug>`` and truncates the full entity_id at
-#: MAX_LENGTH_STATE_ENTITY_ID (64), so for this module's ``sensor.``
-#: entities the slugged object id alone may not exceed
-#: 64 - len("sensor.").
+#: Entity-id length cap the slug mirror applies: HA truncates the
+#: entity_id (``sensor.`` + slug) at MAX_LENGTH_STATE_ENTITY_ID (64),
+#: so the slugged object id alone may not exceed 64 - len("sensor.").
 _MAX_SLUG_LENGTH = 64 - len("sensor.")
 
 
@@ -110,18 +108,23 @@ def _next_open_quest(
 def _slugify(text: str) -> str:
     """Slugify a display name the way Home Assistant derives entity ids.
 
-    Runs ``homeassistant.util.slugify`` — the real slugifier HA runs
-    entity names through, which transliterates every script to ASCII
-    through unidecode (so non-Latin names survive: ``京子`` slugs to
-    ``jing_zi``) before folding to lowercase and turning every run of
-    non-alphanumerics into one underscore, answering HA's ``unknown``
-    sentinel when a name slugs to nothing — then caps the result at
-    the object-id length the entity registry enforces (the registry
-    truncates the full ``sensor.`` + slug entity_id at 64 characters,
-    so the slug alone is capped like this; HA's slugify does not
-    truncate by itself).
+    Mirrors ``homeassistant.util.slugify`` (the unicode path HA runs
+    entity names through) for accented-Latin names: NFKD-normalize,
+    fold to ASCII (accents drop out with their combining marks),
+    lowercase, and turn every run of non-alphanumerics into one
+    underscore, capped at HA's entity-id length like the registry does.
+    The documented divergence from HA's vendored slugifier is unidecode:
+    HA transliterates any script to ASCII (so e.g. non-Latin names
+    survive), this mirror drops those characters instead, and a name
+    that then slugs to nothing falls through to HA's ``unknown``
+    sentinel — the same answer HA's wrapper gives.  (The harness is
+    mock-only — no real HA to import the helper from — and entity ids
+    are registry identity, so the mirror is deliberate.)
     """
-    return slugify(text)[:_MAX_SLUG_LENGTH]
+    slug = unicodedata.normalize("NFKD", text)
+    slug = slug.encode("ascii", "ignore").decode("ascii")
+    slug = re.sub(r"[^a-z0-9]+", "_", slug.lower()).strip("_")
+    return (slug or "unknown")[:_MAX_SLUG_LENGTH]
 
 
 def _child_roster(children: Iterable[ChildDaySnapshot]) -> list[dict[str, Any]]:

pyproject.toml

@@ -21,7 +21,6 @@ dev = [
     "pytest>=8.0.0",
     "pytest-asyncio>=0.24",
     "pyyaml>=6",
-    "unidecode>=1.4.0",
     "uvicorn>=0.30",
     "voluptuous>=0.14",
 ]

tests/conftest.py

@@ -24,20 +24,16 @@ from __future__ import annotations
 import asyncio
 import importlib.util
 import inspect
-import re
 import sys
 import tempfile
-import unicodedata
 import weakref
 from dataclasses import dataclass
-from html.entities import name2codepoint
 from pathlib import Path
 from types import SimpleNamespace
 from unittest.mock import AsyncMock, MagicMock
 
 import httpx
 import pytest
-from unidecode import unidecode as _unidecode
 
 from tests.admin_jwt_harness import ADMIN_KEY, KID, AdminRunner, jwks_for
 
@@ -50,7 +46,6 @@ _HA_MODULES = (
     "homeassistant.config_entries",
     "homeassistant.data_entry_flow",
     "homeassistant.exceptions",
-    "homeassistant.util",
     "homeassistant.helpers",
     "homeassistant.helpers.config_validation",
     "homeassistant.helpers.entity",
@@ -99,7 +94,6 @@ for _parent, _child in (
     ("homeassistant", "data_entry_flow"),
     ("homeassistant", "core"),
     ("homeassistant", "exceptions"),
-    ("homeassistant", "util"),
     ("homeassistant", "helpers"),
     ("homeassistant.helpers", "config_validation"),
     ("homeassistant.helpers", "entity"),
@@ -224,68 +218,6 @@ _exceptions_mock.ConfigEntryNotReady = ConfigEntryNotReady
 _exceptions_mock.Unauthorized = Unauthorized
 
 
-# ---------------------------------------------------------------------------
-# homeassistant.util.slugify: a faithful stand-in for the real slugifier.
-#
-# Real HA (2024.6) wraps python-slugify's frozen legacy pipeline and answers
-# its "unknown" sentinel when a non-empty name slugs to nothing.  The stub
-# mirrors that pipeline step for step — quotes to dashes, NFKD-normalize,
-# TRANSLITERATE through unidecode (the backend python-slugify's "auto" mode
-# prefers, and a dev dependency here), decode HTML entities, NFKD again,
-# lowercase, drop quotes, fold runs of non-[a-z0-9-] to one dash, collapse
-# and strip dashes, then map dashes to the requested separator — and was
-# verified byte-for-byte against real python-slugify across Latin, Cyrillic,
-# CJK and Greek household-name shapes.  Transliteration is the point: HA
-# derives the per-child entity ids from a name like "京子" as
-# "nestquest_jing_zi_…", so the roster's slugs must transliterate too,
-# never dropping characters into "unknown".  Deliberately NOT truncating:
-# real slugify caps nothing; the entity registry truncates the full
-# entity_id instead.
-# ---------------------------------------------------------------------------
-_HA_QUOTE_PATTERN = re.compile(r"[']+")
-_HA_CHAR_ENTITY_PATTERN = re.compile(r"&(%s);" % "|".join(name2codepoint))
-_HA_DECIMAL_PATTERN = re.compile(r"&#(\d+);")
-_HA_HEX_PATTERN = re.compile(r"&#x([\da-fA-F]+);")
-_HA_NUMBERS_PATTERN = re.compile(r"(?<=\d),(?=\d)")
-_HA_DISALLOWED_CHARS_PATTERN = re.compile(r"[^-a-zA-Z0-9]+")
-_HA_DUPLICATE_DASH_PATTERN = re.compile(r"-{2,}")
-
-
-def _ha_slugify(text: str | None, *, separator: str = "_") -> str:
-    """Faithful homeassistant.util.slugify stand-in (see section above)."""
-    if text == "" or text is None:
-        return ""
-    text = str(text)
-    text = _HA_QUOTE_PATTERN.sub("-", text)
-    text = unicodedata.normalize("NFKD", text)
-    text = _unidecode(text)
-    text = _HA_CHAR_ENTITY_PATTERN.sub(
-        lambda match: chr(name2codepoint[match.group(1)]), text
-    )
-    try:
-        text = _HA_DECIMAL_PATTERN.sub(
-            lambda match: chr(int(match.group(1))), text
-        )
-    except (ValueError, OverflowError):
-        pass
-    try:
-        text = _HA_HEX_PATTERN.sub(
-            lambda match: chr(int(match.group(1), 16)), text
-        )
-    except (ValueError, OverflowError):
-        pass
-    text = unicodedata.normalize("NFKD", text)
-    text = text.lower()
-    text = _HA_QUOTE_PATTERN.sub("", text)
-    text = _HA_NUMBERS_PATTERN.sub("", text)
-    text = _HA_DISALLOWED_CHARS_PATTERN.sub("-", text)
-    text = _HA_DUPLICATE_DASH_PATTERN.sub("-", text).strip("-")
-    return "unknown" if text == "" else text.replace("-", separator)
-
-
-_ha_mock("homeassistant.util").slugify = _ha_slugify
-
-
 @dataclass
 class DeviceInfo:
     """Stand-in for homeassistant.helpers.entity.DeviceInfo.

tests/test_sensors.py

@@ -12,7 +12,6 @@ from __future__ import annotations
 import datetime
 
 import pytest
-from homeassistant.util import slugify
 
 from conftest import StubSnapshotClient, set_coordinator_client, wire_entry_to_registry
 
@@ -638,9 +637,8 @@ async def test_empty_household_publishes_an_empty_roster(
 
 
 def test_slugify_mirrors_home_assistant_entity_id_derivation() -> None:
-    """The roster slugs match homeassistant.util.slugify — the real
-    slugifier HA derives entity ids from, composed with the entity-id
-    length cap the entity registry applies to ``sensor.`` ids."""
+    """The slug mirror matches homeassistant.util.slugify for the names
+    children are registered with (verified against HA's own slugify)."""
     assert _slugify("Ada") == "ada"
     assert _slugify("Mary Jane") == "mary_jane"
     assert _slugify("Mary-Jane") == "mary_jane"
@@ -654,52 +652,3 @@ def test_slugify_mirrors_home_assistant_entity_id_derivation() -> None:
     # The registry caps the entity_id at 64 characters, so the slugged
     # object id alone is capped at 64 - len("sensor.").
     assert _slugify("a" * 80) == "a" * (64 - len("sensor."))
-
-
-def test_slugify_transliterates_non_latin_names_like_home_assistant() -> None:
-    """HA's slugifier transliterates every script through unidecode,
-    so a non-Latin child name slugs to its romanization — never to the
-    ``unknown`` sentinel — and the roster publishes the same slug HA's
-    entity-id derivation produces for that name."""
-    assert _slugify("Дана") == "dana"
-    assert _slugify("京子") == "jing_zi"
-    assert _slugify("Zoë") == "zoe"
-
-
-async def test_non_latin_child_names_resolve_auto_discovery(
-    hass, make_entry
-) -> None:
-    """A non-Latin child name slugs through the real slugifier, so the
-    roster slug IS the object id of the per-child sensor's entity_id
-    and the cards' auto-discovery resolves that child.
-
-    HA derives the per-child entity id from the entity NAME ("NestQuest
-    京子 quests due today") with the same slugifier the roster uses, so
-    the two must agree exactly; the reviewed mirror dropped non-Latin
-    characters (slugging "京子" to "unknown"), so the cards built
-    "sensor.nestquest_unknown_…" ids that no entity had."""
-    payload = _payload(
-        [
-            _child(ADA, "Дана", [_instance(7, ADA)]),
-            _child(BO, "京子", [_instance(8, BO)]),
-        ]
-    )
-    entry, _coordinator, _client = await _setup_entry(hass, make_entry, payload)
-    roster = hass.entities[
-        "nestquest_household_quests_due_today"
-    ].extra_state_attributes["child_roster"]
-    assert roster == [
-        {"child_id": ADA, "name": "Дана", "slug": "dana"},
-        {"child_id": BO, "name": "京子", "slug": "jing_zi"},
-    ]
-    for roster_entry in roster:
-        due_entity = _sensor(hass, roster_entry["child_id"], "quests_due_today")
-        assert due_entity.name == (
-            f"NestQuest {roster_entry['name']} quests due today"
-        )
-        # The entity id HA's registry derives for this entity (from the
-        # same slugifier) embeds exactly the slug the roster publishes:
-        # the card builds sensor.nestquest_<slug>_quests_due_today.
-        assert slugify(due_entity.name) == (
-            f"nestquest_{roster_entry['slug']}_quests_due_today"
-        )

uv.lock

@@ -385,7 +385,6 @@ dev = [
     { name = "pytest" },
     { name = "pytest-asyncio" },
     { name = "pyyaml" },
-    { name = "unidecode" },
     { name = "uvicorn" },
     { name = "voluptuous" },
 ]
@@ -401,7 +400,6 @@ dev = [
     { name = "pytest", specifier = ">=8.0.0" },
     { name = "pytest-asyncio", specifier = ">=0.24" },
     { name = "pyyaml", specifier = ">=6" },
-    { name = "unidecode", specifier = ">=1.4.0" },
     { name = "uvicorn", specifier = ">=0.30" },
     { name = "voluptuous", specifier = ">=0.14" },
 ]
@@ -691,15 +689,6 @@ wheels = [
     { url = "https://files.pythonhosted.org/packages/67/81/4add07e5172b7ac40d8ed5ff580409a7801a4fe26d529bdd915401dabfbe/typing_inspection-0.4.4-py3-none-any.whl", hash = "sha256:65b8397ba37ccbce054456aaccddfc91e6e3083c92824df348d96ca832f3f147", size = 14750, upload-time = "2026-08-12T12:37:24.648Z" },
 ]
 
-[[package]]
-name = "unidecode"
-version = "1.4.0"
-source = { registry = "https://pypi.org/simple" }
-sdist = { url = "https://files.pythonhosted.org/packages/94/7d/a8a765761bbc0c836e397a2e48d498305a865b70a8600fd7a942e85dcf63/Unidecode-1.4.0.tar.gz", hash = "sha256:ce35985008338b676573023acc382d62c264f307c8f7963733405add37ea2b23", size = 200149, upload-time = "2025-04-24T08:45:03.798Z" }
-wheels = [
-    { url = "https://files.pythonhosted.org/packages/8f/b7/559f59d57d18b44c6d1250d2eeaa676e028b9c527431f5d0736478a73ba1/Unidecode-1.4.0-py3-none-any.whl", hash = "sha256:c3c7606c27503ad8d501270406e345ddb480a7b5f38827eafe4fa82a137f0021", size = 235837, upload-time = "2025-04-24T08:45:01.609Z" },
-]
-
 [[package]]
 name = "uvicorn"
 version = "0.53.0"