- id: '1743176311797'
  alias: Bambu Lab - Spaghetti Detection
  description: ''
  use_blueprint:
    path: nberktumer/spaghetti_detection.yaml
    input:
      home_assistant_host: http://192.168.1.86:8123
      obico_host: http://192.168.1.85:3333
      obico_auth_token: 5b3dd0ff-7e41-47f4-9027-9e609813ae66
      printer_current_stage_sensor: sensor.p1s_01p09c470102673_current_stage
      printer_print_status_sensor: sensor.p1s_01p09c470102673_print_status
      printer_camera: camera.p1s_01p09c470102673_camera
      printer_pause_button: button.p1s_01p09c470102673_pause_printing
      printer_resume_button: button.p1s_01p09c470102673_resume_printing
      printer_stop_button: button.p1s_01p09c470102673_stop_printing
      printer_chamber_light: light.p1s_01p09c470102673_chamber_light
      detection_frequency: /30
      notification_settings: standard
      notification_service: notify.mobile_app_joshuas_iphone_of_pain
- id: '1767118574570'
  alias: Centauri Carbon Status Updates
  description: Centauri Carbon progress notifications; intentionally disabled at startup.
  initial_state: false
  use_blueprint:
    path: danielcherubini/elegoo_printer_progress.yaml
    input:
      error_status_reason_entity: sensor.centauri_carbon_error_status_reason
      notify_device: eabafa43fa1148e4facc8e5a4151958d
      current_status_entity: sensor.centauri_carbon_current_status
      print_status_entity: sensor.centauri_carbon_print_status
      percent_complete_entity: sensor.centauri_carbon_percent_complete
- id: '1767118623336'
  alias: Saturn Status Notifications
  description: ''
  use_blueprint:
    path: danielcherubini/elegoo_printer_progress.yaml
    input:
      percent_complete_entity: sensor.saturn_iv_percent_complete
      print_status_entity: sensor.saturn_iv_print_status
      current_status_entity: sensor.saturn_iv_current_status
      error_status_reason_entity: sensor.saturn_iv_error_status_reason
      notify_device: eabafa43fa1148e4facc8e5a4151958d
      enable_status_notifications: false
- id: '1767120051057'
  alias: Turn off Resin Heater after Print
  description: >-
    Turn off the heater five minutes after a terminal print status. Any status
    change cancels the pending shutoff; busy or unavailable printers never pass
    the shutdown check. Exhaust fan control is disabled pending replacement.
  triggers:
  - trigger: state
    entity_id:
    - sensor.saturn_iv_print_status
    - sensor.saturn_iv_current_status
    to: null
  - trigger: homeassistant
    event: start
  - trigger: event
    event_type: automation_reloaded
  conditions: []
  actions:
  - condition: template
    value_template: >-
      {{ states('sensor.saturn_iv_print_status')
         in ['complete', 'completed', 'finish', 'idle', 'failed', 'cancelled', 'canceled', 'stopped']
         and states('sensor.saturn_iv_current_status')
           in ['idle', 'complete', 'completed', 'finish', 'stopped'] }}
  - delay:
      minutes: 5
  - condition: template
    value_template: >-
      {{ states('sensor.saturn_iv_print_status')
         in ['complete', 'completed', 'finish', 'idle', 'failed', 'cancelled', 'canceled', 'stopped']
         and states('sensor.saturn_iv_current_status')
           in ['idle', 'complete', 'completed', 'finish', 'stopped'] }}
  - type: turn_off
    device_id: fc9f0c9a71eaa4bd6aa14417425f61cb
    entity_id: a91e4bedcc7c5d57563d88bd58d67c9c
    domain: switch
  - type: turn_off
    device_id: 1b1350195291ecd20cf7c69604c09699
    entity_id: 74c861175e7d5036c2253583f59d1100
    domain: switch
    enabled: false
  mode: restart
- id: '1767816737180'
  alias: Saturn 4 Complete Notification
  description: Disabled because the Saturn progress blueprint already sends completion notifications.
  initial_state: false
  triggers:
  - trigger: state
    entity_id:
    - sensor.saturn_iv_print_status
    to:
    - complete
  conditions: []
  actions:
  - action: notify.mobile_app_joshuas_iphone_of_pain
    metadata: {}
    data:
      message: Saturn 4 print complete.
  mode: single
- id: '1770938475431'
  alias: Jordyn-A1-lights-on-during-print
  description: ''
  triggers:
  - device_id: 6d6eebb0e8ea6f46ac2ec3a3a5a5eae3
    domain: bambu_lab
    type: event_print_started
    trigger: device
  - device_id: 6d6eebb0e8ea6f46ac2ec3a3a5a5eae3
    domain: bambu_lab
    type: event_print_error_cleared
    trigger: device
  conditions: []
  actions:
  - action: light.turn_on
    metadata: {}
    target:
      entity_id: light.jordyns_layer_slayer_chamber_light
    data: {}
  - type: turn_on
    device_id: d174bbc498cde1d02e455cb133c04675
    entity_id: 0736793ae0d143db76ea7c64d86f4268
    domain: switch
  - action: light.turn_on
    metadata: {}
    target:
      entity_id: light.jordyn_s_led_controller_jordyn_s_led_controller
    data:
      color_temp_kelvin: 6500
      brightness_pct: 100
      effect: None
  mode: single
- id: '1770938581699'
  alias: D’s turd flinger Light on during print
  description: ''
  triggers:
  - device_id: 299743e9ce66334a0f3bac10eb24cf31
    domain: bambu_lab
    type: event_print_started
    trigger: device
  - device_id: 299743e9ce66334a0f3bac10eb24cf31
    domain: bambu_lab
    type: event_print_error_cleared
    trigger: device
  conditions: []
  actions:
  - action: light.turn_on
    metadata: {}
    target:
      entity_id:
      - light.a1_03919d540806387_chamber_light
      - light.led_controller_polly_pocket_declan_s_led_controller
    data:
      color_temp_kelvin: 6500
      brightness_pct: 100
  - type: turn_on
    device_id: c63f4513655bdd5b44b998f45b491136
    entity_id: fe6d0eee24eb1b397d37b7389137b5b5
    domain: switch
  mode: single
- id: '1770938855253'
  alias: Jordyn-a1-light-off-print-send
  description: ''
  triggers:
  - device_id: 6d6eebb0e8ea6f46ac2ec3a3a5a5eae3
    domain: bambu_lab
    type: event_print_finished
    trigger: device
  - device_id: 6d6eebb0e8ea6f46ac2ec3a3a5a5eae3
    domain: bambu_lab
    type: event_print_canceled
    trigger: device
  conditions: []
  actions:
  - action: light.turn_off
    metadata: {}
    target:
      entity_id:
      - light.jordyns_layer_slayer_chamber_light
      - light.jordyn_s_led_controller_jordyn_s_led_controller
    data:
      transition: 60
  - type: turn_off
    device_id: d174bbc498cde1d02e455cb133c04675
    entity_id: 0736793ae0d143db76ea7c64d86f4268
    domain: switch
  mode: single
- id: '1770943298493'
  alias: D’s turd flinger Light Off after print
  description: ''
  triggers:
  - device_id: 299743e9ce66334a0f3bac10eb24cf31
    domain: bambu_lab
    type: event_print_finished
    trigger: device
  - device_id: 299743e9ce66334a0f3bac10eb24cf31
    domain: bambu_lab
    type: event_print_canceled
    trigger: device
  conditions: []
  actions:
  - action: light.turn_off
    metadata: {}
    target:
      entity_id:
      - light.a1_03919d540806387_chamber_light
      - light.led_controller_polly_pocket_declan_s_led_controller
    data: {}
  - type: turn_off
    device_id: c63f4513655bdd5b44b998f45b491136
    entity_id: fe6d0eee24eb1b397d37b7389137b5b5
    domain: switch
  mode: single
- id: '1770943760193'
  alias: Jordyn-A1-Flash-Red-When-Print-Error
  description: ''
  triggers:
  - device_id: 6d6eebb0e8ea6f46ac2ec3a3a5a5eae3
    domain: bambu_lab
    type: event_print_error
    trigger: device
  - device_id: 6d6eebb0e8ea6f46ac2ec3a3a5a5eae3
    domain: bambu_lab
    type: event_print_failed
    trigger: device
  conditions: []
  actions:
  - action: light.turn_on
    metadata: {}
    target:
      entity_id: light.jordyn_s_led_controller_jordyn_s_led_controller
    data:
      rgb_color:
      - 255
      - 0
      - 0
      effect: Red Flash
      brightness_pct: 100
  - type: turn_off
    device_id: d174bbc498cde1d02e455cb133c04675
    entity_id: 0736793ae0d143db76ea7c64d86f4268
    domain: switch
  - action: light.turn_off
    metadata: {}
    target:
      entity_id: light.jordyns_layer_slayer_chamber_light
    data: {}
  mode: single
- id: '1770944104889'
  alias: Prints-Charming-Lights-On-Print-Started
  description: 'Repaired by agent: replaced deleted Bambu device trigger with P1S
    print_status entity trigger.'
  triggers:
  - trigger: state
    entity_id: sensor.p1s_01p09c470102673_print_status
    to:
    - printing
    - running
  conditions: []
  actions:
  - action: light.turn_on
    metadata: {}
    target:
      entity_id: light.p1s_01p09c470102673_chamber_light
    data: {}
  mode: single
- id: '1770944259063'
  alias: Constipation-Orion-Light-On-When-Print-Starts
  description: ''
  triggers:
  - device_id: 615a0b19447425670a6b61ec2343c791
    domain: bambu_lab
    type: event_print_started
    trigger: device
  conditions: []
  actions:
  - action: light.turn_on
    metadata: {}
    target:
      entity_id: light.constipation_orion_chamber_light
    data: {}
  mode: single
- id: '1770944373316'
  alias: Constipation-Orion-Light-Off-Print-Finishes
  description: Turn the chamber light off after a completed or cancelled print.
  triggers:
  - device_id: 615a0b19447425670a6b61ec2343c791
    domain: bambu_lab
    type: event_print_finished
    trigger: device
  - device_id: 615a0b19447425670a6b61ec2343c791
    domain: bambu_lab
    type: event_print_canceled
    trigger: device
  conditions: []
  actions:
  - action: light.turn_off
    metadata: {}
    target:
      entity_id: light.constipation_orion_chamber_light
    data: {}
  mode: single
- id: '1770944453024'
  alias: Prints-Charming-Light-Off-Print-Completes
  description: 'Repaired by agent: replaced deleted Bambu device trigger with P1S
    print_status entity trigger.'
  triggers:
  - trigger: state
    entity_id: sensor.p1s_01p09c470102673_print_status
    to:
    - finish
    - complete
    - completed
    - idle
    - failed
    - cancelled
  conditions:
  - condition: template
    value_template: '{{ trigger.from_state is not none and trigger.from_state.state
      in [''printing'',''running'',''paused'',''pause'',''prepare'',''preparing''] }}'
  actions:
  - action: light.turn_off
    metadata: {}
    data: {}
    target:
      entity_id: light.p1s_01p09c470102673_chamber_light
  mode: single
- id: '1771272500745'
  alias: polly-pocket-a1-mini-lights-on-during-print
  description: ''
  triggers:
  - device_id: 1cf63ab34db5ac50291c1477cddf2b9a
    domain: bambu_lab
    type: event_print_started
    trigger: device
  conditions: []
  actions:
  - action: light.turn_on
    metadata: {}
    target:
      entity_id:
      - light.a1mini_0309ca580403653_chamber_light
      - light.polly_s_led_controller_polly_s_led_controller
    data:
      color_temp_kelvin: 6500
      brightness_pct: 100
  - type: turn_on
    device_id: a78c9554b983d1e2459194cc0fee22d3
    entity_id: d430d19aa2f118038cb01a3157865ed0
    domain: switch
  mode: single
- id: '1771272773906'
  alias: polly-pocket-a1-mini-lights-off-during-print
  description: ''
  triggers:
  - device_id: 1cf63ab34db5ac50291c1477cddf2b9a
    domain: bambu_lab
    type: event_print_finished
    trigger: device
  - device_id: 1cf63ab34db5ac50291c1477cddf2b9a
    domain: bambu_lab
    type: event_print_canceled
    trigger: device
  conditions: []
  actions:
  - action: light.turn_off
    metadata: {}
    target:
      entity_id:
      - light.a1mini_0309ca580403653_chamber_light
      - light.polly_s_led_controller_polly_s_led_controller
    data: {}
  - type: turn_off
    device_id: a78c9554b983d1e2459194cc0fee22d3
    entity_id: d430d19aa2f118038cb01a3157865ed0
    domain: switch
  mode: single
- id: fdm_printer_exhaust_fans
  alias: FDM Printer Exhaust Fans During Prints
  description: >-
    Turn on the FDM Printer Exhaust Fans outlet when Constipation Orion,
    Prints Charming, or Printney Spears (Centauri Carbon) is printing. Leave it
    on until all three have been finished for 30 minutes. A pause keeps the
    fans on. An unknown printer status does not start the shutoff timer.
  mode: restart
  triggers:
  - trigger: state
    entity_id:
    - sensor.constipation_orion_print_status
    - sensor.p1s_01p09c470102673_print_status
    - sensor.centauri_carbon_print_status
  - trigger: homeassistant
    event: start
  - trigger: event
    event_type: automation_reloaded
  conditions: []
  actions:
  - variables:
      active_states:
      - printing
      - running
      - pause
      - paused
      - pausing
      - prepare
      - preparing
      printers:
      - sensor.constipation_orion_print_status
      - sensor.p1s_01p09c470102673_print_status
      - sensor.centauri_carbon_print_status
  - if:
    - condition: template
      value_template: >-
        {{ expand(printers) | selectattr('state', 'in', active_states) | list | count > 0 }}
    then:
    - action: switch.turn_on
      target:
        entity_id: switch.studio_plug_2
    else:
    - condition: template
      value_template: "{{ trigger.platform == 'state' }}"
    - condition: template
      value_template: >-
        {{ expand(printers) | selectattr('state', 'in', ['unknown', 'unavailable']) | list | count == 0 }}
    - delay:
        minutes: 30
    - condition: template
      value_template: >-
        {{ expand(printers) | selectattr('state', 'in', active_states) | list | count == 0
           and expand(printers) | selectattr('state', 'in', ['unknown', 'unavailable']) | list | count == 0 }}
    - action: switch.turn_off
      target:
        entity_id: switch.studio_plug_2