packages:
  jarvis-satellite: !include jarvis-satellite/jarvis-satellite-base.yaml

### Change the following for each satellite device, e.g. "jarvis-satellite-office" and "jarvis-satellite-bedroom" and to match each ESP board pinout
substitutions:
  flash_size: "8MB"
  psram_mode: "quad"
  psram_speed: "80MHz"
  i2s_in_lrclk_pin: GPIO6
  i2s_in_bclk_pin: GPIO7
  mic_din_pin: GPIO4
  i2s_out_lrclk_pin: GPIO45
  i2s_out_bclk_pin: GPIO46
  speaker_dout_pin: GPIO8
  led_pin: GPIO16
  led_num_leds: "8"
  btn_vol_up_pin: GPIO1
  btn_vol_down_pin: GPIO2
  btn_mute_pin: GPIO3
  btn_wake_pin: GPIO10
  cpu_frequency: "240MHz"


esphome:
  name: office-jarvis-satellite
  friendly_name: "Office Jarvis"

wifi:
  ssid: !secret wifi_iot_ssid
  password: !secret wifi_password
  ap:
    ssid: "Jarvis-Satellite-AP"
    password: !secret wifi_password