substitutions:
  device_name: led-controller-jordyn-a1
  friendly_name: "Jordyn's LED Controller"
  
esphome:
  name: ${device_name}
  friendly_name: ${friendly_name}
  
esp32:
  board: esp32-c3-devkitm-1
  framework:
    type: esp-idf

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: !secret api_encryption_key

# Enable over-the-air updates
ota:
  - platform: esphome
    password: !secret ota_password

wifi:
  ssid: !secret wifi_iot_ssid
  password: !secret wifi_password
  manual_ip:
    static_ip: 192.168.69.80
    gateway: 192.168.69.1
    subnet: 255.255.255.0
  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "${friendly_name} Fallback"
    password: !secret fallback_password
  
  # Prevents aggressive reconnection attempts
  power_save_mode: none  # Use 'light' for battery devices
  
  # Slower but more reliable connection
  fast_connect: true
  
  # Handle connection failures gracefully
  on_connect:
    - logger.log: "Wi-Fi connected!"
  on_disconnect:
    - logger.log: "Wi-Fi disconnected!"

# Reduce mDNS traffic
mdns:
  disabled: false  # Set to true if you use static IPs and don't need discovery

#captive_portal:

web_server:
  port: 80

# LED Light configuration
light:
  - platform: esp32_rmt_led_strip
    rgb_order: GRB
    chipset: WS2812
    pin: GPIO7
    num_leds: 60
    name: "${friendly_name}"
    id: led_strip
    
    # Default color on boot
    restore_mode: RESTORE_DEFAULT_OFF
    
    # Color correction for more accurate colors (optional)
    # Uncomment and adjust if your LEDs look too blue/green
    # color_correct: [100%, 100%, 100%]
    
    # Effects - you can enable these for more features!
    effects:
      # Basic effects
      - random:
          name: "Random"
          transition_length: 5s
          update_interval: 7s
      
      - strobe:
          name: "Strobe"
          colors:
            - state: true
              brightness: 100%
              red: 100%
              green: 100%
              blue: 100%
              duration: 500ms
            - state: false
              duration: 250ms
      
      - flicker:
          name: "Flicker"
          alpha: 95%
          intensity: 1.5%
      
      # Rainbow effects
      - addressable_rainbow:
          name: "Rainbow"
          speed: 10
          width: 50
      
      - addressable_color_wipe:
          name: "Color Wipe"
          colors:
            - red: 100%
              green: 0%
              blue: 0%
              num_leds: 1
            - red: 0%
              green: 100%
              blue: 0%
              num_leds: 1
            - red: 0%
              green: 0%
              blue: 100%
              num_leds: 1
          add_led_interval: 100ms
          reverse: false
      
      - addressable_scan:
          name: "Scan"
          move_interval: 100ms
          scan_width: 3
      
      - addressable_twinkle:
          name: "Twinkle"
          twinkle_probability: 5%
          progress_interval: 4ms
      
      - addressable_fireworks:
          name: "Fireworks"
          update_interval: 32ms
          spark_probability: 10%
          use_random_color: true
          fade_out_rate: 120
      
      # Pulse effect
      - pulse:
          name: "Pulse"
          transition_length: 1s
          update_interval: 1s

# Sensors for monitoring
sensor:
  # WiFi Signal Strength
  - platform: wifi_signal
    name: "${friendly_name} WiFi Signal"
    update_interval: 60s

  # Uptime
  - platform: uptime
    name: "${friendly_name} Uptime"

# Diagnostic sensors
  - platform: wifi_signal
    name: "${device_name} WiFi Signal"
    update_interval: 60s
    
  - platform: uptime
    name: "${device_name} Uptime"
    update_interval: 60s
    
# Text sensors
text_sensor:
  # ESPHome version
  - platform: version
    name: "${friendly_name} ESPHome Version"
    
  # WiFi info
  - platform: wifi_info
    ip_address:
      name: "${device_name} IP Address"
    ssid:
      name: "${device_name} Connected SSID"
    bssid:
      name: "${device_name} BSSID"

# Button to restart ESP32
button:
  - platform: restart
    name: "${friendly_name} Restart"

# Watchdog to auto-reboot if things go wrong
interval:
  - interval: 5min
    then:
      - if:
          condition:
            and:
              - lambda: 'return millis() > 300000;'  # >5 min uptime
              - not:
                  wifi.connected:
          then:
            - logger.log: "Wi-Fi not connected for 5 min, rebooting..."
            - delay: 10s
            - lambda: 'App.safe_reboot();'