substitutions:
  device_name: laundry-litter-box-camera
  friendly_name: "Laundry Litter Box Camera"

esphome:
  name: ${device_name}
  friendly_name: ${friendly_name}

esp32:
  board: esp32dev
  framework:
    type: esp-idf

logger:

api:
  encryption:
    key: !secret api_encryption_key

ota:
  - platform: esphome
    password: !secret ota_password

wifi:
  ssid: !secret wifi_iot_ssid
  password: !secret wifi_password
  manual_ip:
    static_ip: 192.168.69.220
    gateway: 192.168.69.1
    subnet: 255.255.255.0
  ap:
    ssid: "laundry-litter-cam-fallback"
    password: !secret fallback_password
  # Prevents aggressive reconnection attempts
  power_save_mode: none  # Use 'light' for battery devices
  
  # Slower but more reliable connection
  fast_connect: true
  
  # Handle connection failures gracefully
  on_connect:
    - logger.log: "Wi-Fi connected!"
  on_disconnect:
    - logger.log: "Wi-Fi disconnected!"

# Reduce mDNS traffic
mdns:
  disabled: true  # Set to true if you use static IPs and don't need discovery

# Diagnostic sensors
sensor:
  - platform: wifi_signal
    name: "${device_name} WiFi Signal"
    update_interval: 60s
    
  - platform: uptime
    name: "${device_name} Uptime"
    update_interval: 60s

text_sensor:
  - platform: wifi_info
    ip_address:
      name: "${device_name} IP Address"
    ssid:
      name: "${device_name} Connected SSID"
    bssid:
      name: "${device_name} BSSID"

# Watchdog to auto-reboot if things go wrong
interval:
  - interval: 5min
    then:
      - if:
          condition:
            and:
              - lambda: 'return millis() > 300000;'  # >5 min uptime
              - not:
                  wifi.connected:
          then:
            - logger.log: "Wi-Fi not connected for 5 min, rebooting..."
            - delay: 10s
            - lambda: 'App.safe_reboot();'

captive_portal:

i2c:
  - id: camera_i2c
    sda: GPIO26
    scl: GPIO27

psram:
  mode: quad
  speed: 80MHz

esp32_camera:
  external_clock:
    pin: GPIO0
    frequency: 20MHz
  i2c_id: camera_i2c
  data_pins: [GPIO5, GPIO18, GPIO19, GPIO21, GPIO36, GPIO39, GPIO34, GPIO35]
  vsync_pin: GPIO25
  href_pin: GPIO23
  pixel_clock_pin: GPIO22
  power_down_pin: GPIO32
  resolution: 1024x768
  jpeg_quality: 15
  vertical_flip: true
  horizontal_mirror: false
  max_framerate: 20 fps
  idle_framerate: 0.05 fps
  name: ${device_name}

esp32_camera_web_server:
  - port: 8080
    mode: STREAM
  - port: 8081
    mode: SNAPSHOT

switch:
  - platform: gpio
    name: "${device_name}-flash"
    pin: 4