# PanelLan SC05_X / ZX2D80CE02S-V10 hardware test.
# Target: current ESPHome with the mipi_spi octal/I80 driver.
# This is a first-flash test, not the final Home Assistant remote UI.
# Uses the Wi-Fi, API, and OTA secrets shared by this Home Assistant setup.

esphome:
  name: panel-remote-test
  friendly_name: Panel Remote Test

esp32:
  board: esp32-s3-devkitc-1
  flash_size: 8MB
  framework:
    type: esp-idf

psram:
  mode: quad

logger:

api:
  encryption:
    key: !secret api_encryption_key

ota:
  - platform: esphome
    password: !secret ota_password

wifi:
  ssid: !secret wifi_iot_ssid
  password: !secret wifi_password
  ap:
    ssid: Panel Remote Setup
    password: !secret fallback_password

captive_portal:

# The board's 8-bit 8080 LCD bus is handled as an octal bus by ESPHome.
# Pins are from the Wireless-Tag WT32S3-28S PRO / ZX2D80CE02S datasheet.
spi:
  type: octal
  id: lcd_bus
  clk_pin: GPIO17       # LCD_WR
  data_pins:
    - GPIO16            # DB0
    - GPIO40            # DB1
    - GPIO15            # DB2
    - GPIO7             # DB3
    - GPIO41            # DB4
    - GPIO42            # DB5
    - GPIO2             # DB6
    - GPIO1             # DB7

display:
  - platform: mipi_spi
    id: panel_display
    model: ST7789V
    spi_id: lcd_bus
    bus_mode: octal
    dc_pin: GPIO18       # LCD_RS
    reset_pin: GPIO3     # shared LCD/touch reset
    dimensions: 240x320
    data_rate: 8MHz
    invert_colors: true
    show_test_card: true

output:
  - platform: ledc
    id: backlight_pwm
    pin: GPIO47

light:
  - platform: monochromatic
    id: panel_backlight
    name: Screen Backlight
    output: backlight_pwm
    restore_mode: ALWAYS_ON
    default_transition_length: 0s

i2c:
  id: touch_bus
  sda: GPIO8
  scl: GPIO9
  scan: true

touchscreen:
  - platform: ft5x06
    id: panel_touch
    i2c_id: touch_bus
    display: panel_display
    interrupt_pin: GPIO48
    on_touch:
      - logger.log: Touch detected