updates

automations/05_printers_and_workshop.yaml

@@ -377,96 +377,59 @@
     entity_id: d430d19aa2f118038cb01a3157865ed0
     domain: switch
   mode: single
-- id: '1772979000001'
-  alias: Constipation-Orion 80mm Exhaust Fan On During Print
-  description: Disabled pending replacement exhaust fan control.
-  initial_state: false
-  triggers:
-  - trigger: device
-    device_id: 615a0b19447425670a6b61ec2343c791
-    domain: bambu_lab
-    type: event_print_started
-  conditions: []
-  actions:
-  - action: fan.turn_on
-    target:
-      entity_id: fan.fdm_exhaust_fan_control_80mm_exhaust_fan
-  mode: single
-- id: '1772979000002'
-  alias: Turn Off 80mm Exhaust Fan 15 Minutes After Constipation-Orion Print Finishes
-  description: Disabled pending replacement exhaust fan control.
-  initial_state: false
-  triggers:
-  - trigger: device
-    device_id: 615a0b19447425670a6b61ec2343c791
-    domain: bambu_lab
-    type: event_print_finished
-  - trigger: device
-    device_id: 615a0b19447425670a6b61ec2343c791
-    domain: bambu_lab
-    type: event_print_canceled
-  conditions: []
-  actions:
-  - action: fan.turn_on
-    target:
-      entity_id: fan.fdm_exhaust_fan_control_80mm_exhaust_fan
-  - delay:
-      hours: 0
-      minutes: 15
-      seconds: 0
-  - condition: template
-    value_template: '{{ states(''sensor.constipation_orion_print_status'') != ''printing''
-      }}'
-  - action: fan.turn_off
-    target:
-      entity_id: fan.fdm_exhaust_fan_control_80mm_exhaust_fan
+- id: fdm_printer_exhaust_fans
+  alias: FDM Printer Exhaust Fans During Prints
+  description: >-
+    Turn on the FDM Printer Exhaust Fans outlet when Constipation Orion,
+    Prints Charming, or Printney Spears (Centauri Carbon) is printing. Leave it
+    on until all three have been finished for 30 minutes. A pause keeps the
+    fans on. An unknown printer status does not start the shutoff timer.
   mode: restart
-- id: '1772979000003'
-  alias: Prints Charming Or Printney Spears 120mm Exhaust Fan On During Print
-  description: Disabled pending replacement control for the shared exhaust fan.
-  initial_state: false
   triggers:
   - trigger: state
-    entity_id: sensor.p1s_01p09c470102673_print_status
-    to:
-    - printing
-    - running
+    entity_id:
+    - sensor.constipation_orion_print_status
+    - sensor.p1s_01p09c470102673_print_status
+    - sensor.centauri_carbon_print_status
+  - trigger: homeassistant
+    event: start
+  - trigger: event
+    event_type: automation_reloaded
   conditions: []
   actions:
-  - action: fan.turn_on
-    target:
-      entity_id: fan.fdm_exhaust_fan_control_120mm_exhaust_fan
-  mode: single
-- id: '1772979000004'
-  alias: Turn Off 120mm Exhaust Fan 15 Minutes After Print Completion
-  description: Disabled pending replacement control for the shared exhaust fan.
-  initial_state: false
-  triggers:
-  - trigger: state
-    entity_id: sensor.p1s_01p09c470102673_print_status
-    to:
-    - finish
-    - complete
-    - completed
-    - idle
-    - failed
-    - cancelled
-  conditions:
-  - condition: template
-    value_template: '{{ trigger.from_state is not none and trigger.from_state.state
-      in [''printing'',''running''] }}'
-  actions:
-  - action: fan.turn_on
-    target:
-      entity_id: fan.fdm_exhaust_fan_control_120mm_exhaust_fan
-  - delay:
-      hours: 0
-      minutes: 15
-      seconds: 0
-  - condition: template
-    value_template: '{{ states(''sensor.p1s_01p09c470102673_print_status'') != ''printing''
-      }}'
-  - action: fan.turn_off
-    target:
-      entity_id: fan.fdm_exhaust_fan_control_120mm_exhaust_fan
-  mode: restart
+  - variables:
+      active_states:
+      - printing
+      - running
+      - pause
+      - paused
+      - pausing
+      - prepare
+      - preparing
+      printers:
+      - sensor.constipation_orion_print_status
+      - sensor.p1s_01p09c470102673_print_status
+      - sensor.centauri_carbon_print_status
+  - if:
+    - condition: template
+      value_template: >-
+        {{ expand(printers) | selectattr('state', 'in', active_states) | list | count > 0 }}
+    then:
+    - action: switch.turn_on
+      target:
+        entity_id: switch.studio_plug_2
+    else:
+    - condition: template
+      value_template: "{{ trigger.platform == 'state' }}"
+    - condition: template
+      value_template: >-
+        {{ expand(printers) | selectattr('state', 'in', ['unknown', 'unavailable']) | list | count == 0 }}
+    - delay:
+        minutes: 30
+    - condition: template
+      value_template: >-
+        {{ expand(printers) | selectattr('state', 'in', active_states) | list | count == 0
+           and expand(printers) | selectattr('state', 'in', ['unknown', 'unavailable']) | list | count == 0 }}
+    - action: switch.turn_off
+      target:
+        entity_id: switch.studio_plug_2