Delete polly-a1-mini-camera.yaml

esphome/polly-a1-mini-camera.yaml

@@ -1,133 +0,0 @@
-substitutions:
-  device_name: polly-a1-mini-camera
-  friendly_name: "Polly's A1 Camera"
-  
-esphome:
-  name: ${device_name}
-  friendly_name: ${friendly_name}
-
-esp32:
-  board: esp32dev
-  framework:
-    type: esp-idf
-#  minimum_chip_revision: 3.1
-
-# Enable logging
-logger:
-  level: INFO
-
-# Enable Home Assistant API
-api:
-  encryption:
-    key: "iLF5QCgTVCwgaA5vjTGez03Dfjvns8JvkcwmUN4NXR8="
-
-ota:
-  - platform: esphome
-    password: "58f86a5e60abe60886cec2f65a1d3da5"
-
-wifi:
-  ssid: !secret wifi_iot_ssid
-  password: !secret wifi_password
-  manual_ip:
-    static_ip: 192.168.69.194
-    gateway: 192.168.69.1
-    subnet: 255.255.255.0
-  # Enable fallback hotspot (captive portal) in case wifi connection fails
-  ap:
-    ssid: "${friendly_name} Fallback"
-    password: !secret wifi_password
-  
-  # Prevents aggressive reconnection attempts
-  power_save_mode: none  # Use 'light' for battery devices
-  
-  # Slower but more reliable connection
-  fast_connect: true
-  
-  # Handle connection failures gracefully
-  on_connect:
-    - logger.log: "Wi-Fi connected!"
-  on_disconnect:
-    - logger.log: "Wi-Fi disconnected!"
-
-# Reduce mDNS traffic
-mdns:
-  disabled: true  # Set to true if you use static IPs and don't need discovery
-
-#captive_portal:
-
-web_server:
-  port: 80
-
-i2c:
-  - id: camera_i2c
-    sda: GPIO26
-    scl: GPIO27
-
-psram:
-  mode: quad
-  speed: 80MHz
-
-esp32_camera:
-  external_clock:
-    pin: GPIO0
-    frequency: 20MHz
-  i2c_id: camera_i2c
-  data_pins: [GPIO5, GPIO18, GPIO19, GPIO21, GPIO36, GPIO39, GPIO34, GPIO35]
-  vsync_pin: GPIO25
-  href_pin: GPIO23
-  pixel_clock_pin: GPIO22
-  power_down_pin: GPIO32
-  resolution: 1024X768
-  jpeg_quality: 20
-  vertical_flip: False
-  horizontal_mirror: True
-  max_framerate: 20 fps
-  idle_framerate: 0.05 fps
-
-  # Image settings
-  name: ${device_name}
-
-esp32_camera_web_server:
-  - port: 8080
-    mode: STREAM
-  - port: 8081
-    mode: SNAPSHOT
-
-switch:
-  - platform: gpio
-    name: "${device_name}-flash"
-    pin: 4
-
-# Diagnostic sensors
-sensor:
-  - platform: wifi_signal
-    name: "${device_name} WiFi Signal"
-    update_interval: 60s
-    
-  - platform: uptime
-    name: "${device_name} Uptime"
-    update_interval: 60s
-
-text_sensor:
-  - platform: wifi_info
-    ip_address:
-      name: "${device_name} IP Address"
-    ssid:
-      name: "${device_name} Connected SSID"
-    bssid:
-      name: "${device_name} BSSID"
-
-# Watchdog to auto-reboot if things go wrong
-interval:
-  - interval: 5min
-    then:
-      - if:
-          condition:
-            and:
-              - lambda: 'return millis() > 300000;'  # >5 min uptime
-              - not:
-                  wifi.connected:
-          then:
-            - logger.log: "Wi-Fi not connected for 5 min, rebooting..."
-            - delay: 10s
-            - lambda: 'App.safe_reboot();'