updates

esphome/.device-builder.json

@@ -14,15 +14,15 @@
   },
   "_firmware_jobs": [
     {
-      "job_id": "cd93b1b34cb5",
-      "configuration": "resin-curing-timer.yaml",
+      "job_id": "bb19d223ab5c",
+      "configuration": "bambu-printer-display.yaml",
       "job_type": "compile",
       "status": "completed",
-      "created_at": "2026-10-17T19:07:37.762042+00:00",
-      "started_at": "2026-10-17T19:07:37.763132+00:00",
-      "completed_at": "2026-10-17T19:09:40.012778+00:00",
-      "compile_started_at": "2026-10-17T19:07:57.149555+00:00",
-      "compile_ended_at": "2026-10-17T19:09:39.494762+00:00",
+      "created_at": "2026-10-19T19:05:44.828542+00:00",
+      "started_at": "2026-10-19T19:05:44.829561+00:00",
+      "completed_at": "2026-10-19T19:06:58.521787+00:00",
+      "compile_started_at": "2026-10-19T19:05:54.474763+00:00",
+      "compile_ended_at": "2026-10-19T19:06:57.987575+00:00",
       "exit_code": 0,
       "error": null,
       "port": "",
@@ -31,7 +31,69 @@
       "new_name": "",
       "depends_on": "",
       "dependency_released": false,
-      "progress": 99,
+      "progress": 83,
+      "remote_peer": "",
+      "remote_job_id": "",
+      "remote_peer_label": "",
+      "device_name": "",
+      "device_friendly_name": "",
+      "source": "local",
+      "source_pin_sha256": "",
+      "source_label": "",
+      "source_esphome_version": "",
+      "target_esphome_version": "",
+      "failure_reason": ""
+    },
+    {
+      "job_id": "b4aaf902c652",
+      "configuration": "bambu-printer-display.yaml",
+      "job_type": "upload",
+      "status": "cancelled",
+      "created_at": "2026-10-18T13:33:52.743290+00:00",
+      "started_at": "2026-10-18T13:35:06.474973+00:00",
+      "completed_at": "2026-10-18T13:44:03.699755+00:00",
+      "compile_started_at": null,
+      "compile_ended_at": null,
+      "exit_code": -15,
+      "error": null,
+      "port": "OTA",
+      "flash_bootloader": false,
+      "is_deferred_install": false,
+      "new_name": "",
+      "depends_on": "0bac95d6302f",
+      "dependency_released": true,
+      "progress": 50,
+      "remote_peer": "",
+      "remote_job_id": "",
+      "remote_peer_label": "",
+      "device_name": "",
+      "device_friendly_name": "",
+      "source": "local",
+      "source_pin_sha256": "",
+      "source_label": "",
+      "source_esphome_version": "",
+      "target_esphome_version": "",
+      "failure_reason": ""
+    },
+    {
+      "job_id": "197c6aafb405",
+      "configuration": "resin-curing-timer.yaml",
+      "job_type": "compile",
+      "status": "completed",
+      "created_at": "2026-10-17T19:20:52.620376+00:00",
+      "started_at": "2026-10-17T19:20:52.620726+00:00",
+      "completed_at": "2026-10-17T19:21:20.348169+00:00",
+      "compile_started_at": "2026-10-17T19:20:55.169397+00:00",
+      "compile_ended_at": "2026-10-17T19:21:19.787726+00:00",
+      "exit_code": 0,
+      "error": null,
+      "port": "",
+      "flash_bootloader": false,
+      "is_deferred_install": false,
+      "new_name": "",
+      "depends_on": "",
+      "dependency_released": false,
+      "progress": 36,
       "remote_peer": "",
       "remote_job_id": "",
       "remote_peer_label": "",
@@ -736,9 +798,6 @@
   "declan-a1-camera.yaml": {
     "mac_address": "D4:E9:F4:A3:59:E8"
   },
-  "esp32-h2c-camera.yaml": {
-    "mac_address": "E8:F6:0A:87:12:B0"
-  },
   "laundry-litter-box-camera.yaml": {
     "mac_address": "D4:E9:F4:A3:59:E8"
   },
@@ -760,16 +819,16 @@
   "panel-hardware-test.yaml": {
     "mac_address": "68:B6:B3:33:69:50"
   },
-  "living-room-remote.yaml": {
-    "mac_address": "68:B6:B3:33:69:50"
-  },
-  "family-room-remote.yaml": {
-    "mac_address": "34:CD:B0:0C:3D:CC"
-  },
   "living-room.yaml": {
     "mac_address": "B0:CB:D8:03:3B:6C"
   },
   "resin-curing-timer.yaml": {
     "mac_address": "B0:CB:D8:D7:B9:18"
+  },
+  "bambu-printer-display.yaml": {
+    "mac_address": "34:CD:B0:0E:42:A0"
+  },
+  "family-room-control.yaml": {
+    "mac_address": "A4:F0:0F:68:A1:8C"
   }
 }

esphome/family-room-control.local.yaml

@@ -0,0 +1 @@
+{}

esphome/family-room-control.yaml

@@ -0,0 +1,32 @@
+# Keep this file safe: it contains the unique keys for this screen.
+# Wi-Fi comes from the secrets.yaml of ESPHome Device Builder.
+substitutions:
+  DEVICE_NAME: "family-room-control"
+  DEVICE_FRIENDLY_NAME: "Family Room Control"
+  LANGUAGE: "en"
+  DISPLAY_MODEL: "ST7789V"
+  GITHUB_REF: "screens-v0.4.89"
+
+esphome:
+  name: "family-room-control"
+  friendly_name: "Family Room Control"
+
+packages:
+  display:
+    url: https://github.com/MaxGramser/homeassistant_espscreen
+    ref: screens-v0.4.89
+    files: [packages/cyd.yaml]
+    refresh: 0s
+  local_overrides: !include family-room-control.local.yaml
+
+api:
+  encryption:
+    key: "T0Qgy1qdHCXD0IiO72V0AqUb1WL3F9pOQ/zg2RlG9sg="
+ota:
+  - platform: esphome
+    password: "zPMI1ZoPpQIu8yulgUiUTi8pPT8UClg9"
+    allow_partition_access: true
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+  power_save_mode: none