Add initial configuration for Family Room and Living Room remotes, and common panel hardware setup

esphome/panel-remote-common.yaml

@@ -0,0 +1,80 @@
+# Shared SC05_X / ZX2D80CE02S hardware for both room remotes.
+# Keep this file beside the room YAML files in ESPHome.
+
+esp32:
+  board: esp32-s3-devkitc-1
+  flash_size: 8MB
+  framework:
+    type: esp-idf
+
+psram:
+  mode: quad
+
+logger:
+
+api:
+  encryption:
+    key: !secret api_encryption_key
+
+ota:
+  - platform: esphome
+    password: !secret ota_password
+
+wifi:
+  ssid: !secret wifi_iot_ssid
+  password: !secret wifi_password
+  ap:
+    ssid: ${friendly_name} Setup
+    password: !secret fallback_password
+
+captive_portal:
+
+spi:
+  type: octal
+  id: lcd_bus
+  clk_pin: GPIO17
+  data_pins: [GPIO16, GPIO40, GPIO15, GPIO7, GPIO41, GPIO42, GPIO2, GPIO1]
+
+display:
+  - platform: mipi_spi
+    id: panel_display
+    model: ST7789V
+    spi_id: lcd_bus
+    bus_mode: octal
+    dc_pin: GPIO18
+    reset_pin: GPIO3
+    dimensions: 240x320
+    rotation: 90
+    data_rate: 8MHz
+    auto_clear_enabled: false
+    update_interval: never
+
+output:
+  - platform: ledc
+    id: backlight_pwm
+    pin: GPIO47
+
+light:
+  - platform: monochromatic
+    id: panel_backlight
+    name: Screen Backlight
+    output: backlight_pwm
+    restore_mode: ALWAYS_ON
+    default_transition_length: 0s
+
+i2c:
+  id: touch_bus
+  sda: GPIO8
+  scl: GPIO9
+  scan: true
+
+touchscreen:
+  - platform: ft5x06
+    id: panel_touch
+    i2c_id: touch_bus
+    display: panel_display
+    interrupt_pin: GPIO48
+    on_touch:
+      - light.turn_on:
+          id: panel_backlight
+          brightness: 70%