Add initial configuration for Family Room and Living Room remotes, and common panel hardware setup

2026-09-29 20:36:41 -04:00
parent 757aa10564
commit a9a7e4ca23
4 changed files with 397 additions and 0 deletions
@@ -0,0 +1,92 @@
+# PanelLan SC05_X / ZX2D80CE02S-V10 hardware test.
+# Target: current ESPHome with the mipi_spi octal/I80 driver.
+# This is a first-flash test, not the final Home Assistant remote UI.
+# Uses the Wi-Fi, API, and OTA secrets shared by this Home Assistant setup.
+
+esphome:
+  name: panel-remote-test
+  friendly_name: Panel Remote Test
+
+esp32:
+  board: esp32-s3-devkitc-1
+  flash_size: 8MB
+  framework:
+    type: esp-idf
+
+psram:
+  mode: quad
+
+logger:
+
+api:
+  encryption:
+    key: !secret api_encryption_key
+
+ota:
+  - platform: esphome
+    password: !secret ota_password
+
+wifi:
+  ssid: !secret wifi_iot_ssid
+  password: !secret wifi_password
+  ap:
+    ssid: Panel Remote Setup
+    password: !secret fallback_password
+
+captive_portal:
+
+# The board's 8-bit 8080 LCD bus is handled as an octal bus by ESPHome.
+# Pins are from the Wireless-Tag WT32S3-28S PRO / ZX2D80CE02S datasheet.
+spi:
+  type: octal
+  id: lcd_bus
+  clk_pin: GPIO17       # LCD_WR
+  data_pins:
+    - GPIO16            # DB0
+    - GPIO40            # DB1
+    - GPIO15            # DB2
+    - GPIO7             # DB3
+    - GPIO41            # DB4
+    - GPIO42            # DB5
+    - GPIO2             # DB6
+    - GPIO1             # DB7
+
+display:
+  - platform: mipi_spi
+    id: panel_display
+    model: ST7789V
+    spi_id: lcd_bus
+    bus_mode: octal
+    dc_pin: GPIO18       # LCD_RS
+    reset_pin: GPIO3     # shared LCD/touch reset
+    dimensions: 240x320
+    data_rate: 8MHz
+    show_test_card: true
+
+output:
+  - platform: ledc
+    id: backlight_pwm
+    pin: GPIO47
+
+light:
+  - platform: monochromatic
+    id: panel_backlight
+    name: Screen Backlight
+    output: backlight_pwm
+    restore_mode: ALWAYS_ON
+    default_transition_length: 0s
+
+i2c:
+  id: touch_bus
+  sda: GPIO8
+  scl: GPIO9
+  scan: true
+
+touchscreen:
+  - platform: ft5x06
+    id: panel_touch
+    i2c_id: touch_bus
+    display: panel_display
+    interrupt_pin: GPIO48
+    on_touch:
+      - logger.log: Touch detected