diff --git a/esphome/esp32-saturn4-cam.yaml b/esphome/esp32-saturn4-cam.yaml
deleted file mode 100644
index ee9fc06..0000000
--- a/esphome/esp32-saturn4-cam.yaml
+++ /dev/null
@@ -1,140 +0,0 @@
-substitutions:
-  device_name: saturn4-printer-cam
-  hostname: "Saturn 4 Printer Cam"
-  friendly_name: "Saturn 4 Printer Cam"
-  device_description: ESP32-CAM module in Saturn 4 Ultra Resin printer.
-
-esphome:
-  name: ${device_name}
-  friendly_name: ${friendly_name}
-
-esp32:
-  board: esp32dev
-  framework:
-    type: esp-idf
-
-# Enable logging
-logger:
-
-# Enable Home Assistant API
-api:
-  encryption:
-    key: "3Zxo91fAfA7wpZ4DAYFxGarCRIGQr+0rUJH2taJo7ds="
-
-ota:
-  - platform: esphome
-    password: "d2e50b2ad36ed7de4ecbfd90725765e3"
-
-wifi:
-  ssid: !secret wifi_iot_ssid
-  password: !secret wifi_password
-
-  # Enable fallback hotspot (captive portal) in case wifi connection fails
-  ap:
-    ssid: "Esp32-Saturn4-Cam"
-    password: "klRzTYuqPJXm"
-  # Prevents aggressive reconnection attempts
-  power_save_mode: none  # Use 'light' for battery devices
-  
-  # Slower but more reliable connection
-  fast_connect: true
-  
-  # Handle connection failures gracefully
-  on_connect:
-    - logger.log: "Wi-Fi connected!"
-  on_disconnect:
-    - logger.log: "Wi-Fi disconnected!"
-
-# Reduce mDNS traffic
-mdns:
-  disabled: false  # Set to true if you use static IPs and don't need discovery
-
-# Diagnostic sensors
-sensor:
-  - platform: wifi_signal
-    name: "${device_name} WiFi Signal"
-    update_interval: 60s
-    
-  - platform: uptime
-    name: "${device_name} Uptime"
-    update_interval: 60s
-
-text_sensor:
-  - platform: wifi_info
-    ip_address:
-      name: "${device_name} IP Address"
-    ssid:
-      name: "${device_name} Connected SSID"
-    bssid:
-      name: "${device_name} BSSID"
-
-# Watchdog to auto-reboot if things go wrong
-interval:
-  - interval: 5min
-    then:
-      - if:
-          condition:
-            and:
-              - lambda: 'return millis() > 300000;'  # >5 min uptime
-              - not:
-                  wifi.connected:
-          then:
-            - logger.log: "Wi-Fi not connected for 5 min, rebooting..."
-            - delay: 10s
-            - lambda: 'App.safe_reboot();'
-
-captive_portal:
-
-# Example configuration entry
-i2c:
-  - id: camera_i2c
-    sda: GPIO26
-    scl: GPIO27
-
-psram:
-  mode: quad
-  speed: 80MHz
-
-# Flashlight # you can control this flashlight within Homeassistant or mqtt to shine on the birds. use it with an timer!
-output:
-  - platform: ledc
-    pin: GPIO4
-    id: gpio_4
-    channel: 2
-
-## GPIO_4 is the flash light pin
-light:
-  - platform: monochromatic
-    output: gpio_4
-    name: $hostname light
-    restore_mode: RESTORE_AND_OFF
-    icon: mdi:flash
-
-esp32_camera:
-  external_clock:
-    pin: GPIO0
-    frequency: 20MHz
-  i2c_id: camera_i2c
-  data_pins: [GPIO5, GPIO18, GPIO19, GPIO21, GPIO36, GPIO39, GPIO34, GPIO35]
-  vsync_pin: GPIO25
-  href_pin: GPIO23
-  pixel_clock_pin: GPIO22
-  power_down_pin: GPIO32
-  resolution: 640x480 # you can use: [1600x1200 , 1280x1024 , 1024x768 , 800x600, 640x480 ] for best performance (FPS) use 1024 of lower resolution.
-  jpeg_quality: 12 #The JPEG quality that the camera should encode images with. From 10 (best) to 63 (worst)
-  aec2: true
-  ae_level: 2
-  brightness: 2 #The brightness to apply to the picture, default 0
-  contrast: 2
-  saturation: -2
-  vertical_flip: False
-
-  # Image settings
-  name: ${device_name}
-  # ...
-
-esp32_camera_web_server:
-  - port: 80
-    mode: STREAM
-  - port: 8080
-    mode: SNAPSHOT
\ No newline at end of file