Printers

3 printers · status polled every 10 s · MQTT is read-only

Data shown
Fields tagged feature exist only on feature/7efc2030…-printer-connections (4e17f9e), not in production.

In progress 1

P1S - Prints Charming

Bambu Lab · P1S
● Printing
Ready · last report 2s agofeature
Connected
Gridfinity_bins_3x21h 04m started 08:37 · weight read from the 3MF when it endsso far
Loaded filamentnot confirmed in use
AMS 14 / 4
1Sunlu · Black PLA + 2.01000 g
2Sunlu · Copper PLA + Silk⚠ 97 g
3Overture · Mist Gray PLA Marble920 g
4JAYO · Black Rapid PETG Matte655 g
External0 / 1
1Empty
Connection details (stored)
IP
10.60.1.242
Serial
01P09A••••••4821
Access code
✓ stored, never shown
Added
7 Aug 2026
Session
#3 feature

Last finished: Lid_v3 · failed yesterday 16:49

Needs attention 1

A1 - Jordyns Layer Slayer

Bambu Lab · A1
⟳ Reconnecting ⚡ Offline

⚡ MQTT connection lost

Disconnected, reconnecting. Last contact 6m ago (09:35:11). feature Extrudex's MQTT session to this printer dropped. The time it dropped isn't recorded on dev.
  • The printer itself may still be printing. This is Extrudex's connection, not the printer's power.
  • Print capture is paused. A job that starts and finishes during the outage won't be recorded.
  • On reconnect: if Coaster_set is still running, its record stays open and gets +1 gap (its duration becomes an upper bound). Otherwise it closes as unknown, with no duration.
Coaster_setOPEN RECORD started 08:55 · watched until the connection dropped Last known: Printing · 6m ago. Cached from the lost session, not live. feature
Camera unavailable while the printer is offline
Loaded filamentfrom Extrudex records, not the printer
AMS Lite2 / 4
1Sunlu · Black PETG CF Matte812 g
2AMOLEN · Red Yellow Blue PLA Matte744 g
3Empty
4Empty
Connection details (stored)
IP
10.60.1.x (sample)
Serial
039••••••••7710
Access code
✓ stored, never shown
Lifecycle
reconnecting · stale: true feature
Failure
none reported. A reconnect can have no failure detail.
Session
#14 (increments on every reconnect)
Retrying automatically. There's nothing to press.

Idle 1

H2C - Constipation Orion

Bambu Lab · H2C
Idle
Ready · last report 4s ago featureConnected

Last: Benchy_x4 · finished 05:27 · ≤ 3h 12m upper bound · 1 gap

AMS 13 / 4
1Elegoo · Black Rapid PETG⚠ 142 g
2Elegoo · Blue Rapid PETG1000 g
3Elegoo · White PLA Matte610 g
4Empty
Connection details (stored)
IP
10.60.1.202
Serial
31B••••••••0093
Access code
✓ stored, never shown

Future, not built Ideas that need data Extrudex doesn't store

Nothing in this box can be built from today's data. Each item says what's missing.

Progress % and time left

mc_percent is parsed from MQTT but used only internally. It isn't stored or returned by /api/printers. ETA isn't read at all.

Nozzle and bed temperature

220 °C · 60 °C Temperatures aren't parsed from the report.

Current layer

Layer 112 / 190 Layer fields aren't parsed.

AMS remaining % and humidity

82% · humidity 2 Not read. AMS remain is only meaningful for genuine RFID spools, which isn't what's mostly run here.

Alert when MQTT drops

🔔 notify after 5 min Drops only show in container logs today (CONTEXT open work #4). On dev, nothing stores when it dropped.

Which spool is feeding now

▶ AMS 1 · slot 2 "Loaded" is recorded; "in use" isn't. That's why the list says not confirmed in use.